Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › IMMOBILISER SYSTEM(w/ Smart Entry and Start System)
RM3160E _58 Vehicle Interior _019706 THEFT DETERRENT / KEYLESS ENTRY _0095462 IMMOBILISER SYSTEM(w/ Smart Entry and Start System) T

THEFT DETERRENT / KEYLESS ENTRY  IMMOBILISER SYSTEM(w/ Smart Entry and Start System)  PROBLEM SYMPTOMS TABLE  


HINT:
·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.

·

If the problem only occurs in certain locations or at certain times of day, check for wave interference.

·

If optional components are installed, check for wave interference from the components.



Immobiliser System (w/ Smart Entry and Start System)
Symptom Suspected Area Link
Security indicator light does not blink Proceed to "Security Indicator Light Does not Blink" Click here
Immobiliser system does not operate properly Proceed to "Immobiliser System does not Operate Properly" Click here
Engine cannot be started*1 Certification ECU (Smart key ECU assembly) Click here
ID code box (immobiliser code ECU)*3 -
ECM Click here
SFI system Click here
Power source mode cannot be changed*1 Engine switch Click here
Certification ECU (Smart key ECU assembly) -
Steering lock lock/unlock not possible*2 Steering lock ECU (Steering lock actuator assembly) Click here

*1: Refer to Problem Symptoms Table for Smart Entry and Start System (for Start Function).

*2: Refer to Problem Symptoms Table for Steering Lock System.

*3: w/ Rear Seat Heater