OVERALL CAN BUS DIAGRAM (for LHD)
The CAN communication system is composed of 3 buses.
| 1 | ECM
(for V Bus) |
2 | Network Gateway ECU
(w/ Blind Spot Monitor System or Parking Assist Monitor System) (for V Bus and Sub Bus 2) |
| 3 | Main Body ECU (Multiplex Network Body ECU)
(for V Bus and Sub Bus 1*) |
4 | Skid Control ECU (Brake Actuator Assembly)
(for V Bus) |
| 5 | Power Steering ECU Assembly
(for V Bus) |
6 | DLC3
(for V Bus) |
| 7 | Airbag Sensor Assembly
(for V Bus) |
8 | Steering Sensor
(for V Bus) |
| 9 | Air Conditioning Amplifier Assembly
(for V Bus) |
10 | Certification ECU (Smart Key ECU Assembly)
(w/ Smart Entry and Start System) (for V Bus) |
| 11 | 4WD ECU Assembly
(for AWD) (for V Bus) |
12 | Headlight Leveling ECU Assembly
(w/ Automatic Headlight Beam Level Control System) (for V Bus) |
| 13 | Radio and Display Receiver Assembly
(for Radio and Display Type) (for V Bus) |
14 | Combination Meter Assembly
(for V Bus) |
| 15 | Outer Mirror Control ECU Assembly (for Front Passenger Side)
(w/ Seat Position Memory System) (for Sub Bus 1) |
16 | Outer Mirror Control ECU Assembly (for Driver Side)
(w/ Seat Position Memory System) (for Sub Bus 1) |
| 17 | Position Control ECU and Switch Assembly
(w/ Seat Position Memory System) (for Sub Bus 1) |
18 | Multiplex Network Door ECU
(w/ Power Back Door System) (for Sub Bus 1) |
| 19 | Lane Departure Warning Camera
(w/ Lane Departure Alert System) (for Sub Bus 2) |
20 | Blind Spot Monitor Sensor LH
(w/ Blind Spot Monitor System) (for Sub Bus 2) |
| 21 | Television Camera Assembly
(w/ Parking Assist Monitor System) (for Sub Bus 2) |
22 | CAN Junction Terminal
(for Sub Bus 2) |
*: w/ Power Back Door System
The main body ECU (multiplex network body ECU) functions as a gateway between the V bus and sub bus 1.*
*: w/ Power Back Door System
The network gateway ECU functions as a gateway between the V bus and sub bus 2.
The driving support ECU assembly functions as a gateway between the sub bus 2 and sub bus 13.
Refer to the following bus wiring diagrams for details.
V BUS (for LHD)
The CAN communication system connects to other networks via ECUs that function as a gateway.
Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>SYSTEM DIAGRAM
SUB BUS 1 (for LHD w/ Power Back Door System)
SUB BUS 2 (for LHD w/ Blind Spot Monitor System or Parking Assist Monitor System)
OVERALL CAN BUS DIAGRAM (for RHD)
The CAN communication system is composed of 4 buses.
| 1 | ECM
(for V Bus) |
2 | Network Gateway ECU
(w/ Blind Spot Monitor System or Parking Assist Monitor System) (for V Bus and Sub Bus 2) |
| 3 | Main Body ECU (Multiplex Network Body ECU)
(for V Bus and Sub Bus 1*) |
4 | Skid Control ECU (Brake Actuator Assembly)
(for V Bus) |
| 5 | Power Steering ECU Assembly
(for V Bus) |
6 | DLC3
(for V Bus) |
| 7 | Airbag Sensor Assembly
(for V Bus) |
8 | Steering Sensor
(for V Bus) |
| 9 | Air Conditioning Amplifier Assembly
(for V Bus) |
10 | Certification ECU (Smart Key ECU Assembly)
(w/ Smart Entry and Start System) (for V Bus) |
| 11 | 4WD ECU Assembly
(for AWD) (for V Bus) |
12 | Clearance Warning ECU Assembly
(w/ Toyota Parking Assist-sensor System) (for V Bus) |
| 13 | Headlight Leveling ECU Assembly
(w/ Automatic Headlight Beam Level Control System) (for V Bus) |
14 | Navigation Receiver Assembly
(for Navigation Receiver Type) (for V Bus) |
| 15 | Radio and Display Receiver Assembly
(for Radio and Display Type) (for V Bus) |
16 | Combination Meter Assembly
(for V Bus) |
| 17 | Outer Mirror Control ECU Assembly (for Front Passenger Side)
(w/ Seat Position Memory System) (for Sub Bus 1) |
18 | Outer Mirror Control ECU Assembly (for Driver Side)
(w/ Seat Position Memory System) (for Sub Bus 1) |
| 19 | Position Control ECU and Switch Assembly
(w/ Seat Position Memory System) (for Sub Bus 1) |
20 | Multiplex Network Door ECU
(w/ Power Back Door System) (for Sub Bus 1) |
| 21 | Driving Support ECU Assembly
(w/ Pre-crash Safety System) (for Sub Bus 2 and Sub Bus 13) |
22 | Lane Departure Warning Camera
(w/ Lane Departure Alert System) (for Sub Bus 2) |
| 23 | Blind Spot Monitor Sensor LH
(w/ Blind Spot Monitor System) (for Sub Bus 2) |
24 | Television Camera Assembly
(w/ Parking Assist Monitor System) (for Sub Bus 2) |
| 25 | CAN Junction Terminal
(for Sub Bus 2) |
26 | Millimeter Wave Radar Sensor Assembly
(w/ Pre-crash Safety System) (for Sub Bus 13) |
*: w/ Power Back Door System
The main body ECU (multiplex network body ECU) functions as a gateway between the V bus and sub bus 1.*
*: w/ Power Back Door System
The network gateway ECU functions as a gateway between the V bus and sub bus 2.
The driving support ECU assembly functions as a gateway between the sub bus 2 and sub bus 13.
Refer to the following bus wiring diagrams for details.
V BUS (for RHD)
The CAN communication system connects to other networks via ECUs that function as a gateway.
Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>SYSTEM DIAGRAM
SUB BUS 1 (for RHD w/ Power Back Door System)
SUB BUS 2 (for RHD w/ Blind Spot Monitor System or Parking Assist Monitor System)
SUB BUS 13 (for RHD w/ Pre-crash Safety System)