Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › 2013.12–2016.11
RM3160E _56 Audio / Visual / Telematics _019700 AUDIO / VIDEO _0096790 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the radio and display receiver assembly via this circuit.

The sound signal that has been sent is amplified by the radio and display receiver assembly and then is sent to the speakers.

If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the radio and display receiver assembly or speakers.

WIRING DIAGRAM

E277819
0.833,0.635 1.448,0.833 0.615,0.198 10 false ADPG 0.865,1.823 1.479,2.021 0.615,0.198 10 false VAL+ 0.969,2.417 1.458,2.615 0.49,0.198 10 false VA- 0.833,3.01 1.448,3.208 0.615,0.198 10 false AGND 0.844,1.229 1.458,1.427 0.615,0.198 10 false VAR+ 1.333,0.521 1.948,0.719 0.615,0.198 10 false 10 1.333,1.104 1.948,1.302 0.615,0.198 10 false 7 1.333,1.698 1.948,1.896 0.615,0.198 10 false 8 1.333,2.281 1.948,2.479 0.615,0.198 10 false 9 1.323,2.885 1.938,3.083 0.615,0.198 10 false 12 3.271,2.813 3.948,3.01 0.677,0.198 10 false (Shielded) 5.948,0.635 6.563,0.833 0.615,0.198 10 false ADPG 5.958,1.229 6.573,1.427 0.615,0.198 10 false VAR+ 5.958,1.813 6.573,2.01 0.615,0.198 10 false VAL+ 5.958,2.417 6.573,2.615 0.615,0.198 10 false VA- 5.958,3.01 6.573,3.208 0.615,0.198 10 false AGND 5.708,0.531 6.323,0.729 0.615,0.198 10 false 25 5.708,1.115 6.323,1.313 0.615,0.198 10 false 26 5.719,1.708 6.333,1.906 0.615,0.198 10 false 28 5.719,2.313 6.333,2.51 0.615,0.198 10 false 27 5.708,2.896 6.323,3.094 0.615,0.198 10 false 11 0.479,3.438 1.094,3.635 0.615,0.198 10 false F74 0.479,3.625 1.698,4.188 1.219,0.563 10 false No. 1 Stereo Jack Adapter Assembly 5.688,3.469 6.302,3.667 0.615,0.198 10 false F71 5.688,3.635 6.906,4.188 1.219,0.552 10 false Radio and Display Receiver Assembly

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the F71 radio and display receiver assembly connector.


b.

Disconnect the F74 No. 1 stereo jack adapter assembly connector.


c.
E277839
1.5,0.333 1.917,0.552 0.417,0.219 1.5,2.281 1.917,2.5 0.417,0.219 2.083,1.406 2.583,0.833 false 1.583,1.917 2.083,1.531 false 1.917,1.917 2.188,1.531 false 2.417,1.917 2.302,1.531 false 2.75,1.75 2.406,1.531 false 1.979,3.781 2.333,3.667 false 1.99,3.948 2.333,4.167 false 1.083,3.583 1.573,3.792 false 1.083,3.25 1.708,3.781 false 1.844,3.792 2.417,3.333 false 0.167,0.135 0.479,0.333 0.313,0.198 10 false *a 0.188,2.333 0.5,2.531 0.313,0.198 10 false *b 1.594,0.365 2.052,0.563 0.458,0.198 10 false F71 1.604,2.313 2.063,2.51 0.458,0.198 10 false F74 2.625,0.667 3.083,0.865 0.458,0.198 10 false AGND 1.167,1.917 1.625,2.115 0.458,0.198 10 false ADPG 1.708,1.969 2.167,2.167 0.458,0.198 10 false VAR+ 2.333,1.969 2.792,2.167 0.458,0.198 10 false VA- 2.792,1.802 3.25,2 0.458,0.198 10 false VAL+ 2.375,3.552 2.833,3.75 0.458,0.198 10 false ADPG 2.375,4.167 2.833,4.365 0.458,0.198 10 false AGND 0.677,3.469 1.135,3.667 0.458,0.198 10 false VAR+ 0.698,3.083 1.156,3.281 0.458,0.198 10 false VAL+ 2.458,3.167 2.917,3.365 0.458,0.198 10 false VA-
*a Front view of wire harness connector
(to Radio and Display Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F71-25 (ADPG) - F74-10 (ADPG) Always Below 1 Ω
F71-11 (AGND) - F74-12 (AGND) Always Below 1 Ω
F71-26 (VAR+) - F74-7 (VAR+) Always Below 1 Ω
F71-28 (VAL+) - F74-8 (VAL+) Always Below 1 Ω
F71-27 (VA-) - F74-9 (VA-) Always Below 1 Ω
F71-25 (ADPG) - Body ground Always 10 kΩ or higher
F71-11 (AGND) - Body ground Always 10 kΩ or higher
F71-26 (VAR+) - Body ground Always 10 kΩ or higher
F71-28 (VAL+) - Body ground Always 10 kΩ or higher
F71-27 (VA-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR