Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › 2013.12–2016.11
RM3160E _56 Audio / Visual / Telematics _019700 AUDIO / VIDEO _0096790 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Illumination Circuit  


DESCRIPTION

Power is supplied to the radio and display receiver assembly and steering pad switch assembly illumination when the light control switch is in the tail or head position.

WIRING DIAGRAM

E288333E05
5.667,6.01 6.896,6.531 1.229,0.521 10 false Radio and Display Receiver Assembly 2.438,5.677 4.333,5.958 1.896,0.281 10 false Combination Meter Assembly 0.406,4 2.448,4.292 2.042,0.292 10 false Steering Pad Switch Assembly 2.802,3.188 3.906,3.708 1.104,0.521 10 false Spiral Cable Sub-assembly 3.75,0.844 4.271,1.083 0.521,0.24 10 false PANEL 2.792,1.021 3.125,1.26 0.333,0.24 10 false TAIL 0.677,0.688 1.521,0.927 0.844,0.24 10 false from Battery 4.802,0.323 6.594,0.719 1.792,0.396 10 false to Main Body ECU (Multiplex Network Body ECU) 2.448,5.521 2.781,5.76 0.333,0.24 10 false F22 2.667,2.75 3,2.99 0.333,0.24 10 false z4 2.677,2.188 3.01,2.427 0.333,0.24 10 false z4 2.677,1.979 3.01,2.219 0.333,0.24 10 false 1 2.677,2.563 3.01,2.802 0.333,0.24 10 false 8 3.708,2.76 4.042,3 0.333,0.24 10 false F61 3.708,2.198 4.042,2.438 0.333,0.24 10 false F61 3.781,2.573 4.115,2.813 0.333,0.24 10 false 3 3.781,2 4.115,2.24 0.333,0.24 10 false 9 5.521,5.167 5.875,5.406 0.354,0.24 10 false F70 5.552,2.552 5.885,2.792 0.333,0.24 10 false 23 5.51,2.188 5.865,2.427 0.354,0.24 10 false F69 5.542,1.99 5.875,2.229 0.333,0.24 10 false 10 5.51,2.75 5.865,2.99 0.354,0.24 10 false F71 3.719,5.073 4.052,5.313 0.333,0.24 10 false 12 5.583,4.979 5.917,5.219 0.333,0.24 10 false 5 3.406,5.177 3.76,5.417 0.354,0.24 10 false ILL- 5.865,5.188 6.219,5.427 0.354,0.24 10 false ILL- 5.865,2.74 6.344,3.042 0.479,0.302 10 false SWG 5.854,2.188 6.208,2.427 0.354,0.24 10 false ILL+ 3.167,2.083 3.5,2.323 0.333,0.24 10 false IL+2 3.167,2.667 3.5,2.906 0.333,0.24 10 false EAU

CAUTION / NOTICE / HINT

NOTICE:
·

The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION

·

Inspect the fuses for circuits related to this system before performing the following procedure.



PROCEDURE

1.CHECK ILLUMINATION
a.

Check if the illumination for the radio and display receiver assembly, steering pad switch assembly, heater control switch or others (hazard switch, transmission control switch, etc.) comes on when the light control switch is turned to the head or tail position.

Result:
Result Proceed to
Illumination comes on for all components except steering pad switch assembly. A
Illumination comes on for all components except radio and display receiver assembly. B
Illumination comes on only for steering pad switch assembly. C
No illumination comes on (radio and display receiver assembly, hazard switch, heater control switch, etc.). D




A

2.CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)

B

5.CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)

C

D

2.CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)
a.

Disconnect the F61 spiral cable sub-assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
F61-9 (IL+2) - Body ground Light control switch in tail or head position 11 to 14 V



Result:
Proceed to
OK
NG



OK

3.INSPECT STEERING PAD SWITCH ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.INSPECT STEERING PAD SWITCH ASSEMBLY
a.

Remove the steering pad switch assembly.

Click hereSteering>STEERING COLUMN>STEERING PAD SWITCH>REMOVAL


b.

Connect a battery positive (+) lead to terminal 1 (IL+2) and a negative (-) lead to terminal 8 (EAU) of the steering pad switch assembly connector.

E284079C01
4.406,0.479 4.104,0.198 false 4.313,0.823 4.49,0.573 false 0.25,0.208 0.563,0.365 0.313,0.156 10 false *a 3.938,0.031 4.302,0.25 0.365,0.219 10 false IL+2 4.156,0.854 4.521,1.073 0.365,0.219 10 false EAU
*a Component without harness connected
(Steering Pad Switch Assembly)
- -



c.

Check if the illumination for the steering pad switch assembly comes on.

OK:

Illumination for the steering pad switch assembly comes on.



Result:
Proceed to
OK
NG



OK

4.INSPECT SPIRAL CABLE SUB-ASSEMBLY

NG

REPLACE STEERING PAD SWITCH ASSEMBLY

4.INSPECT SPIRAL CABLE SUB-ASSEMBLY
a.

Remove the spiral cable sub-assembly.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>REMOVAL


b.
E268445C21
1.583,0.292 1.906,0.49 0.323,0.198 1.583,3.417 1.906,3.615 0.323,0.198 2.021,0.854 2.365,0.594 false 1.927,4.115 2.365,4.302 false 2.26,1.188 1.938,1.042 false 2.229,3.625 1.865,3.969 false 0.135,0.115 0.448,0.313 0.313,0.198 10 false *a 0.75,0.219 1.063,0.417 0.313,0.198 10 false *b 1.677,0.313 1.99,0.51 0.313,0.198 10 false z4 2.427,0.448 2.76,0.646 0.333,0.198 10 false IL+2 0.74,3.313 1.052,3.51 0.313,0.198 10 false *c 1.635,3.438 1.948,3.635 0.313,0.198 10 false F61 2.135,3.438 2.469,3.635 0.333,0.198 10 false EAU 2.438,4.219 2.771,4.417 0.333,0.198 10 false IL+2 2.333,1.146 2.667,1.344 0.333,0.198 10 false EAU
*a Component without harness connected
(Spiral Cable Sub-assembly)
*b Steering Pad Switch Assembly Side
*c Vehicle Side


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
z4-1 (IL+2) - F61-9 (IL+2) Center 3 Ω or less
2.5 rotations to the left
2.5 rotations to the right
z4-8 (EAU) - F61-3 (EAU) Center 3 Ω or less
2.5 rotations to the left
2.5 rotations to the right



c.

After setting the spiral cable sub-assembly to the center position, rotate the spiral cable sub-assembly 2.5 times clockwise. Then while rotating the spiral cable sub-assembly 5 times counterclockwise, measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
z4-1 (IL+2) - F61-9 (IL+2) Always 3 Ω or less
z4-8 (EAU) - F61-3 (EAU) Always 3 Ω or less


NOTICE:
·

Press and hold the lock located in the center of the spiral cable sub-assembly to rotate the spiral cable sub-assembly.

·

The spiral cable sub-assembly is an important part of the SRS airbag system. Incorrect removal or installation of the spiral cable sub-assembly may prevent the airbag from deploying.

·

As the spiral cable sub-assembly may break, do not rotate the spiral cable sub-assembly more than the specified amount.




Result:
Proceed to
OK
NG



OK

REPAIR OR REPLACE HARNESS OR CONNECTOR (SPIRAL CABLE SUB-ASSEMBLY - BODY GROUND - RADIO AND DISPLAY RECEIVER ASSEMBLY)

NG

REPLACE SPIRAL CABLE SUB-ASSEMBLY

5.CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)
a.

Disconnect the F69 radio and display receiver assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
F69-10 (ILL+) - Body ground Light control switch in tail or head position 11 to 14 V



Result:
Proceed to
OK
NG



OK

6.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - COMBINATION METER ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

6.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - COMBINATION METER ASSEMBLY)
a.

Disconnect the F70 radio and display receiver assembly connector.


b.

Disconnect the F22 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F70-5 (ILL-) - F22-12 (ILL-) Always Below 1 Ω
F70-5 (ILL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR