Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type RH Side)
RM3160E _58 Vehicle Interior _019713 SEAT BELT _0100666 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type RH Side) G

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type RH Side)  INSPECTION  


PROCEDURE

Hide 73380A 1.INSPECT REAR SEAT INNER BELT ASSEMBLY RH

a.
B345488
0.146,0.115 0.521,0.708 0.375,0.594 10 false *a
*a Component without harness connected
(Rear Seat Inner Belt Assembly RH


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Rear seat belt RH unfastened Below 1 Ω
Rear seat belt RH fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner belt assembly RH.