Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat) › 2013.12–2016.11
RM3160E _58 Vehicle Interior _019713 SEAT BELT _0100667 REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat) G

SEAT BELT  REAR CENTER SEAT INNER BELT ASSEMBLY(for Rear No. 1 Seat)  INSPECTION  


PROCEDURE

Hide 73380D 1.INSPECT REAR SEAT INNER BELT ASSEMBLY

a.
B357864
0.635,0.219 0.979,0.438 0.344,0.219 2.354,0.427 2.698,0.646 0.344,0.219 0.146,0.115 0.531,0.406 0.385,0.292 10 false *a 0.698,0.25 1.073,0.531 0.375,0.281 10 false L16 2.479,0.458 2.854,0.74 0.375,0.281 10 false C
*a Component without harness connected
(Rear Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
L16-3 - L16-4 Rear center seat belt unfastened Below 1 Ω
Rear center seat belt fastened 10 kΩ or higher
L16-1 - C-3 Always Below 1 Ω
L16-2 - C-2 Always Below 1 Ω


If the result is not as specified, replace the rear seat inner belt assembly.