Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS
RM3160E _V1 General _019682 SPECIFICATIONS _0095392 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  SERVICE DATA  


VSC OFF Switch:
Tester Connection Condition Specified Condition
6 (+) - 3 (E) Switch pushed Below 1 Ω
6 (+) - 3 (E) Switch not pushed 10 kΩ or higher


Brake Pedal Load Sensing Switch:
Tester Connection Condition Specified Condition
2 (FSW+) - 1(FSW-) Switch OFF (Brake pedal depressed) 950 to 1050 Ω
2 (FSW+) - 1(FSW-) Switch ON (Brake pedal released) 203 to 223 Ω


Downhill Assist Control Switch:
Tester Connection Condition Specified Condition
4 (B) - 1 (E) Switch pushed Below 1 Ω
4 (B) - 1 (E) Switch not pushed 10 kΩ or higher


Stop Light Control Relay:
Tester Connection Condition Specified Condition
3 - 4 Voltage is not applied between terminals 1 and 2 Below 1 Ω
3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 4 Voltage is applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω