Home › Vehicle Exterior › LIGHTING (EXT) › HEIGHT CONTROL SENSOR
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0100996 HEIGHT CONTROL SENSOR A

LIGHTING (EXT)  HEIGHT CONTROL SENSOR  INSTALLATION  


PROCEDURE

Hide 89408D 1.INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

a.

Engage the guide.


b.

Install the bolt and 2 nuts.

Torque:
Bolt : 5.4 N*m (55 kgf*cm, 48 in.*lbf)
Nut : 5.0 N*m (51 kgf*cm, 44 in.*lbf)


c.

Engage the guide.


d.

Install the rear height control sensor sub-assembly LH with the bolt.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


e.

Connect the connector.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION