Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0101004 AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM C

LIGHTING (EXT)  AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM  B2451  Vehicle Specifications have not been Stored  


DESCRIPTION

The headlight leveling ECU assembly stores this DTC if the vehicle specifications have not been stored in the ECU.

HINT:

The vehicle specifications are stored in the ECU at the factory.


DTC No. Detection Item DTC Detection Condition Trouble Area
B2451 Vehicle Specifications have not been Stored Vehicle specifications have not been stored Headlight leveling ECU assembly

CAUTION / NOTICE / HINT

NOTICE:

If the headlight leveling ECU assembly has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight leveling ECU assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM>INITIALIZATION


PROCEDURE

1.SYNCHRONIZE VEHICLE INFORMATION
a.

Synchronize the vehicle information.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM>INITIALIZATION

Body Electrical > HL AutoLeveling > Utility
Tester Display
ECU Information Sync
50005 361 5272

Result:
Proceed to
NEXT



NEXT

2.RECHECK FOR DTC
2.RECHECK FOR DTC
a.

Using the GTS, recheck for DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM>DTC CHECK / CLEAR

Body Electrical > HL AutoLeveling > Trouble Codes
50001 361
OK:

DTC B2451 is not output.



Result:
Proceed to
OK
NG



OK

END

NG

REPLACE HEADLIGHT LEVELING ECU ASSEMBLY