Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for LED Headlight) › 2013.12–2016.11
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0101037 HEADLIGHT ASSEMBLY(for LED Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for LED Headlight)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE NO. 1 HEADLIGHT BULB

a.
E285583

Turn the back cover assembly as shown in the illustration to remove it.


b.
E285585

Disconnect the connector.


c.
E285586

Turn the No. 1 headlight bulb as shown in the illustration to remove it.

NOTICE:

Do not touch the bulb glass.



Hide 81510A 2.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.
E285593

Turn the headlight cord with the front turn signal light bulb as shown in the illustration to disconnect them as a unit.


b.

Remove the front turn signal light bulb from the headlight cord.


Hide 81515B 3.REMOVE FRONT TURN SIGNAL LIGHT SOCKET

a.

Disconnect the connector to remove the front turn signal light socket from the headlight cord.


Hide 81610F 4.REMOVE CLEARANCE LIGHT BULB

a.
E285580
1.583,1.188 1.99,1.188 true 2.042,1.083 2.25,1.292 0.208,0.208 10 true *a
*a Socket


Disconnect the socket with the clearance light bulb as shown in the illustration.


b.

Remove the clearance light bulb from the socket.


Hide 85967 5.REMOVE LIGHT CONTROL ECU

a.
E285588

Remove the 4 screws and disconnect the light control ECU with the No. 1 headlight back cover.


b.
E285589

Disconnect the connector to remove the light control ECU with the No. 1 headlight back cover.


c.
E285591

Remove the 2 screws and light control ECU.


Hide 81134 6.REMOVE HEADLIGHT GASKET

a.
E285590

Remove the headlight gasket.

NOTICE:

After the headlight gasket is removed, be sure to replace it with a new one. Failure to do so may cause water ingress.



Hide 85662 7.REMOVE HEADLIGHT LEVELING MOTOR

a.
E285596
1.365,1.135 2.063,0.573 true 0.792,0.927 0.948,1.125 0.156,0.198 10 true 1 2.156,1.885 2.313,2.083 0.156,0.198 10 true 2 2.094,0.458 2.25,0.656 0.156,0.198 10 true *a
*a Aiming Screw


Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

HINT:
·

Turn the aiming screw until the headlight leveling motor can be moved in the direction indicated by the arrow (2) shown in the illustration.

·

Make sure to remember the number of aiming screw rotations.




b.

Turn the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to disengage the pin.


c.
E285598
1.396,1.135 2.052,0.604 true 0.792,0.917 0.948,1.115 0.156,0.198 10 true 3 1.5,1.896 1.656,2.094 0.156,0.198 10 true 4 2.094,0.49 2.271,0.688 0.177,0.198 10 true *a
*a Aiming Screw


Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration to disengage the shaft.

HINT:

Make sure to remember the number of aiming screw rotations.



d.

Pull out the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to remove it.