Home › Vehicle Exterior › MIRROR (EXT) › RELAY
RM3160E _59 Vehicle Exterior _019720 MIRROR (EXT) _0101079 RELAY G

MIRROR (EXT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT MIR HTR RELAY

a.
B319589

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Battery voltage not applied between terminals 10 kΩ or higher


If the result is not as specified, replace the mirror heater relay.


Hide 2.INSPECT MIR RTR NO. 1 RELAY

a.
B319588

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 4 Battery voltage not applied between terminals Below 1 Ω
3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Battery voltage not applied between terminals 10 kΩ or higher
4 - 5 Always 10 kΩ or higher


If the result is not as specified, replace the MIR RTR NO. 1 relay.


Hide 3.INSPECT MIR RTR NO. 2 RELAY

a.
B319588

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 4 Battery voltage not applied between terminals Below 1 Ω
3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Battery voltage not applied between terminals 10 kΩ or higher
4 - 5 Always 10 kΩ or higher


If the result is not as specified, replace the MIR RTR NO. 2 relay.