Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM3160E _59 Vehicle Exterior _019721 WIPER / WASHER _0101296 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

a.

for LH Side:

i.
E288194
1.313,2.792 1.708,2.479 true 1.698,2.344 2.01,2.5 0.313,0.156 10 false *a 0.844,2.583 1,2.781 0.156,0.198 10 false A 0.854,2.885 1.01,3.083 0.156,0.198 10 false A
*a Dot


Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10.0 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.




b.

for RH Side:

i.
E288195
1.604,2.781 2.042,2.5 true 2.083,2.354 2.396,2.51 0.313,0.156 10 false *a 1.198,2.417 1.354,2.615 0.156,0.198 10 false A 1.104,2.719 1.26,2.917 0.156,0.198 10 false A
*a Dot


Operate the windshield wiper motor assembly.


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop (park) position.

HINT:

After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 10.0 mm (0.394 in.)


OK:

The front wiper stops at the position shown in the illustration.