Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM3160E _59 Vehicle Exterior _019721 WIPER / WASHER _0101297 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

a.
E288227C01
1.073,2.896 1.354,2.563 true 0.906,2.896 1.135,3.135 0.229,0.24 10 true *a 2.24,2.354 2.396,2.552 0.156,0.198 10 true A 2.25,2.51 2.406,2.708 0.156,0.198 10 true B
*a Dot


Operate the rear wiper motor assembly.


b.

Stop the rear wiper motor assembly operation.


c.

Check the automatic stop position.

HINT:

After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Standard Clearance:
Area Measurement
A 15.0 mm (0.591 in.)
B 5.0 mm (0.197 in.)


OK:

The rear wiper stops at the position shown in the illustration.