Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR › 2013.12–2016.11
RM3160E _59 Vehicle Exterior _019721 WIPER / WASHER _0101306 HEADLIGHT CLEANER MOTOR G

WIPER / WASHER  HEADLIGHT CLEANER MOTOR  INSPECTION  


PROCEDURE

Hide 85280A 1.INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

HINT:

This check should be performed with the headlight cleaner motor and pump assembly installed on the washer jar.


a.

Fill the washer jar with washer fluid.


b.
E190232
0.113,0.074 0.295,0.234 0.183,0.161 10 *a
*a Component without harness connected
(Headlight Cleaner Motor and Pump Assembly)


Connect a battery positive (+) lead to terminal 2 of the headlight cleaner motor and pump assembly, and a battery negative (-) lead to terminal 1.


c.

Check that washer fluid flows from the washer jar.

OK:

Washer fluid flows from the washer jar.


If the result is not as specified, replace the headlight cleaner motor and pump assembly.