Home › Vehicle Exterior › WIPER / WASHER › RAIN SENSOR
RM3160E _59 Vehicle Exterior _019721 WIPER / WASHER _0101308 RAIN SENSOR A

WIPER / WASHER  RAIN SENSOR  REMOVAL  


PROCEDURE

Hide 89943 1.REMOVE RAIN SENSOR COVER

a.
E288295

Disengage the 2 guides as shown in the illustration.


b.
E288297

Disengage the 2 claws to remove the rain sensor cover.


Hide 89941 2.REMOVE RAIN SENSOR

a.
E288298

Disconnect the connector.


b.
E288299
2.281,1.688 2.938,1.375 false 2.99,1.25 3.313,1.479 0.323,0.229 10 false *a
*a Stopper


Release the stopper by pulling it out and remove the rain sensor as shown in the illustration.


Hide 56111 3.CLEAN WINDSHIELD GLASS

HINT:
·

Rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated.


·

Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.