Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Radio and Display Type) › 2013.12–2016.11
RM3160E _56 Audio / Visual / Telematics _019701 NAVIGATION / MULTI INFO DISPLAY _0101135 NAVIGATION SYSTEM(for Radio and Display Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  Speaker Circuit  


DESCRIPTION

for 6 Speakers:

If there is a short in a speaker circuit, the radio and display receiver assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the radio and display receiver assembly or speakers.

for 12 Speakers:

If there is a short in a speaker circuit, the stereo component amplifier assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the stereo component amplifier assembly or speakers.

WIRING DIAGRAM

for 6 Speakers


E226481E50
5.354,7.458 7.073,8.063 1.719,0.604 10 false Radio and Display Receiver Assembly 3.021,1.333 4.281,2.104 1.26,0.771 10 false Front No. 2 Speaker Assembly RH 5.552,0.771 5.833,1.042 0.281,0.271 10 false 1 4.542,0.844 4.792,1.063 0.25,0.219 10 false 4 4.542,1.719 5.042,2 0.5,0.281 10 false 2 2.313,0.844 2.604,1.125 0.292,0.281 10 false 3 2.313,1.708 2.594,2.156 0.281,0.448 10 false 1 2.49,0.844 2.813,1.073 0.323,0.229 10 false + 2.5,1.688 2.708,1.927 0.208,0.24 10 false - 4.323,0.844 4.615,1.073 0.292,0.229 10 false + 4.344,1.719 4.604,2 0.26,0.281 10 false - 5.469,0.958 5.833,1.271 0.365,0.313 10 false F69 3.021,1.156 3.281,1.313 0.26,0.156 10 false G1 0.344,1.427 1.625,2.083 1.281,0.656 10 false Front No. 1 Speaker Assembly RH 0.354,1.25 0.615,1.406 0.26,0.156 10 false H3 3.021,3.313 4.313,4.021 1.292,0.708 10 false Front No. 2 Speaker Assembly LH 4.542,2.813 5,3 0.458,0.188 10 false 4 4.531,3.688 5.073,4.042 0.542,0.354 10 false 2 2.323,2.813 2.615,3.094 0.292,0.281 10 false 3 2.313,3.688 2.677,3.958 0.365,0.271 10 false 1 2.469,2.802 2.896,3.073 0.427,0.271 10 false + 2.479,3.667 2.833,3.854 0.354,0.188 10 false - 4.333,2.813 4.854,3.083 0.521,0.271 10 false + 4.344,3.688 4.698,3.979 0.354,0.292 10 false - 3.031,3.156 3.292,3.313 0.26,0.156 10 false G5 0.344,3.365 1.615,4.052 1.271,0.688 10 false Front No. 1 Speaker Assembly LH 0.354,3.198 0.615,3.354 0.26,0.156 10 false I3 0.74,5.125 1.625,5.813 0.885,0.688 10 false Rear Speaker Assembly RH 0.74,4.979 1.052,5.177 0.313,0.198 10 false J4 0.74,6.677 1.604,7.344 0.865,0.667 10 false Rear Speaker Assembly LH 0.74,6.521 1.156,6.802 0.417,0.281 10 false K4 5.479,1.833 6.073,2.229 0.594,0.396 10 false F69 5.458,2.927 6.094,3.156 0.635,0.229 10 false F69 5.479,3.802 6.01,4.083 0.531,0.281 10 false F69 5.479,4.844 5.917,5.188 0.438,0.344 10 false F70 5.479,5.479 5.99,5.771 0.51,0.292 10 false F70 5.49,6.365 5.969,6.625 0.479,0.26 10 false F70 5.469,7 5.938,7.292 0.469,0.292 10 false F70 5.844,0.958 6.323,1.25 0.479,0.292 10 false FR+ 5.844,1.833 6.438,2.104 0.594,0.271 10 false FR- 5.844,2.927 6.292,3.281 0.448,0.354 10 false FL+ 5.844,3.802 6.427,4.135 0.583,0.333 10 false FL- 5.844,4.854 6.354,5.125 0.51,0.271 10 false RR+ 5.844,5.469 6.229,5.76 0.385,0.292 10 false RR- 5.844,6.344 6.219,6.656 0.375,0.313 10 false RL+ 5.844,6.979 6.104,7.135 0.26,0.156 10 false RL- 5.542,6.802 5.938,6.99 0.396,0.188 10 false 6 5.552,6.177 5.854,6.438 0.302,0.26 10 false 2 5.552,5.292 5.958,5.594 0.406,0.302 10 false 3 5.552,4.667 5.917,4.958 0.365,0.292 10 false 1 5.552,3.604 5.823,3.813 0.271,0.208 10 false 6 5.552,2.74 5.927,3.073 0.375,0.333 10 false 2 5.552,1.635 5.875,1.885 0.323,0.25 10 false 5 1.792,1.073 2.448,1.323 0.656,0.25 10 false 1 1.792,1.708 2.177,1.865 0.385,0.156 10 false 2 1.792,3.042 2.208,3.323 0.417,0.281 10 false 1 1.792,3.677 2.156,3.948 0.365,0.271 10 false 2 1.792,4.854 2.094,5.188 0.302,0.333 10 false 1 1.792,5.5 2.115,5.729 0.323,0.229 10 false 2 1.792,6.365 2.073,6.594 0.281,0.229 10 false 1 1.792,7.01 2.188,7.26 0.396,0.25 10 false 2


for 12 Speakers


E287181E02
0.625,1.5 5.365,1.698 4.74,0.198 10 false Front No. 1 Speaker Assembly RH 0.635,2.667 5.375,2.865 4.74,0.198 10 false Front No. 1 Speaker Assembly LH 0.833,3.698 2.875,3.917 2.042,0.219 10 false Front No. 3 Speaker Assembly 1,4.771 3.042,4.99 2.042,0.219 10 false Rear Speaker Assembly RH 1.063,5.781 3.104,6 2.042,0.219 10 false Rear Speaker Assembly LH 5.823,7.094 7.042,7.552 1.219,0.458 10 false Stereo Component Amplifier Assembly 5.979,3.396 6.594,3.594 0.615,0.198 10 false CTR+ 5.979,1.26 6.594,1.458 0.615,0.198 10 false FR+ 5.969,1.927 6.583,2.125 0.615,0.198 10 false FR- 5.969,2.344 6.583,2.542 0.615,0.198 10 false FL+ 5.99,2.969 6.604,3.167 0.615,0.198 10 false FL- 5.948,4.031 6.563,4.229 0.615,0.198 10 false CTR- 5.99,4.438 6.604,4.635 0.615,0.198 10 false RR+ 6,5.063 6.615,5.26 0.615,0.198 10 false RR- 5.99,5.49 6.604,5.688 0.615,0.198 10 false RL+ 5.99,6.094 6.604,6.292 0.615,0.198 10 false RL- 5.823,6.896 6.438,7.094 0.615,0.198 10 false F75 5.74,5.99 6.354,6.188 0.615,0.198 10 false 19 5.792,5.385 6.406,5.583 0.615,0.198 10 false 4 5.74,4.938 6.354,5.135 0.615,0.198 10 false 27 5.74,4.313 6.354,4.51 0.615,0.198 10 false 12 5.74,3.917 6.354,4.115 0.615,0.198 10 false 25 5.75,2.219 6.365,2.417 0.615,0.198 10 false 11 5.74,2.854 6.354,3.052 0.615,0.198 10 false 26 5.74,1.781 6.354,1.979 0.615,0.198 10 false 30 5.74,1.156 6.354,1.354 0.615,0.198 10 false 15 2.875,1.292 3.49,1.49 0.615,0.198 10 false 1 2.896,2.344 3.51,2.542 0.615,0.198 10 false 1 2.885,3.396 3.5,3.594 0.615,0.198 10 false 2 2.875,4.427 3.49,4.625 0.615,0.198 10 false 1 2.865,5.49 3.479,5.688 0.615,0.198 10 false 1 2.896,1.844 3.51,2.042 0.615,0.198 10 false 2 2.896,2.896 3.51,3.094 0.615,0.198 10 false 2 2.885,3.958 3.5,4.156 0.615,0.198 10 false 1 2.885,5.063 3.5,5.26 0.615,0.198 10 false 2 2.896,6.104 3.51,6.302 0.615,0.198 10 false 2 0.635,1.313 1.25,1.51 0.615,0.198 10 false H3 0.625,2.521 1.24,2.719 0.615,0.198 10 false I3 0.865,3.51 1.479,3.708 0.615,0.198 10 false G3 1,4.583 1.615,4.781 0.615,0.198 10 false J4 1.063,5.615 1.677,5.813 0.615,0.198 10 false K4 5.74,3.292 6.354,3.49 0.615,0.198 10 false 10

E286970E03
0.615,1.01 1.073,1.208 0.458,0.198 10 false X23 0.656,2.198 1.115,2.396 0.458,0.198 10 false X5 0.417,3.396 0.875,3.594 0.458,0.198 10 false G2 0.458,4.594 0.917,4.792 0.458,0.198 10 false G6 0.604,6.177 1.063,6.375 0.458,0.198 10 false X26 0.615,1.177 2.854,1.375 2.24,0.198 10 false Rear No. 3 Speaker Assembly RH 0.604,6.344 2.604,6.573 2,0.229 10 false Rear No. 2 Speaker Assembly 0.427,3.552 2.656,3.76 2.229,0.208 10 false Front No. 2 Speaker Assembly RH 2.875,0.865 3.042,1.063 0.167,0.198 10 false 2 0.458,4.75 2.698,4.948 2.24,0.198 10 false Front No. 2 Speaker Assembly LH 0.656,2.365 2.813,2.552 2.156,0.188 10 false Rear No. 3 Speaker Assembly LH 2.885,2.052 3.052,2.25 0.167,0.198 10 false 2 2.583,5.729 3.063,5.938 0.479,0.208 10 false WF1+ 3.052,6.885 3.219,7.083 0.167,0.198 10 false 1 3.542,3.76 3.708,3.958 0.167,0.198 10 false 3 2.875,2.625 3.042,2.823 0.167,0.198 10 false 1 2.875,1.438 3.042,1.635 0.167,0.198 10 false 1 5.729,2.552 5.896,2.75 0.167,0.198 10 false 20 3.052,5.635 3.219,5.833 0.167,0.198 10 false 4 3.521,3.146 3.688,3.344 0.167,0.198 10 false 4 3.51,4.969 3.677,5.167 0.167,0.198 10 false 3 3.052,6.052 3.219,6.25 0.167,0.198 10 false 3 3.51,4.333 3.677,4.531 0.167,0.198 10 false 4 3.052,6.448 3.219,6.646 0.167,0.198 10 false 2 2.625,6.125 3.104,6.333 0.479,0.208 10 false WF1- 2.594,6.552 3.052,6.76 0.458,0.208 10 false WF2+ 2.625,6.969 3.083,7.177 0.458,0.208 10 false WF2- 5.792,1.927 5.958,2.125 0.167,0.198 10 false 5 5.729,1.354 5.896,1.552 0.167,0.198 10 false 24 5.802,0.729 5.979,0.948 0.177,0.219 10 false 9 5.719,3.115 5.896,3.333 0.177,0.219 10 false 14 5.792,6.448 5.969,6.667 0.177,0.219 10 false 7 5.802,5.625 5.979,5.844 0.177,0.219 10 false 8 5.729,3.75 5.906,3.969 0.177,0.219 10 false 29 5.729,4.302 5.906,4.521 0.177,0.219 10 false 13 5.729,4.938 5.906,5.156 0.177,0.219 10 false 28 5.729,6.042 5.906,6.26 0.177,0.219 10 false 23 5.729,6.875 5.906,7.094 0.177,0.219 10 false 22 5.76,7.771 6.094,7.99 0.333,0.219 10 false F75 5.958,0.844 6.292,1.063 0.333,0.219 10 false SR+ 5.76,7.927 6.958,8.333 1.198,0.406 10 false Stereo Component Amplifier Assembly 5.958,1.469 6.292,1.688 0.333,0.219 10 false SR- 5.969,2.677 6.302,2.896 0.333,0.219 10 false SL- 5.969,3.229 6.448,3.448 0.479,0.219 10 false TWR+ 5.958,2.031 6.292,2.25 0.333,0.219 10 false SL+ 5.969,3.854 6.448,4.073 0.479,0.219 10 false TWR- 5.969,5.063 6.448,5.281 0.479,0.219 10 false TWL- 5.969,4.427 6.448,4.646 0.479,0.219 10 false TWL+ 5.969,5.75 6.448,5.969 0.479,0.219 10 false WF1+ 5.969,6.156 6.448,6.375 0.479,0.219 10 false WF1- 5.969,6.563 6.448,6.781 0.479,0.219 10 false WF2+ 5.969,7 6.448,7.219 0.479,0.219 10 false WF2- 3.063,3.333 3.542,3.542 0.479,0.208 10 false TWR+ 3.083,3.76 3.563,3.969 0.479,0.208 10 false TWR- 3.052,4.521 3.531,4.729 0.479,0.208 10 false TWL+ 3.083,4.969 3.563,5.177 0.479,0.208 10 false TWL-


PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.

Result:
Result Proceed to
for 6 Speakers A
for 12 Speakers B




A

2.CHECK SPEAKER (OPERATION CHECK)

B

9.CHECK SPEAKER (OPERATION CHECK)
2.CHECK SPEAKER (OPERATION CHECK)
a.
E268474

Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Radio and Display Type)>OPERATION CHECK


b.

Perform the operation check above and determine the speaker that is not operating.

Result:
Not Operating Speaker Proceed to
Front No. 1 speaker assembly or front No. 2 speaker assembly A
Rear speaker assembly B


HINT:

If sound cannot be heard from any speaker, inspect all of them.




A

3.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY)

B

7.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)
3.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY)
a.

Disconnect the F69 radio and display receiver assembly connector.


b.

Disconnect the G1 and G5 front No. 2 speaker assembly connectors.


c.

Disconnect the H3 and I3 front No. 1 speaker assembly connectors.


d.

Measure the resistance between each of the radio and display receiver assembly and the front No. 2 speaker assemblies to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F69-1 (FR+) - G1-4 (+) Always Below 1 Ω
F69-5 (FR-) - G1-2 (-) Always Below 1 Ω
F69-2 (FL+) - G5-4 (+) Always Below 1 Ω
F69-6 (FL-) - G5-2 (-) Always Below 1 Ω



e.

Measure the resistance between the front No. 2 speaker assemblies and each of the front No. 1 speaker assemblies to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
G1-3 (+) - H3-1 Always Below 1 Ω
G1-1 (-) - H3-2 Always Below 1 Ω
G5-3 (+) - I3-1 Always Below 1 Ω
G5-1 (-) - I3-2 Always Below 1 Ω



f.

Measure the resistance between the radio and display receiver assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F69-1 (FR+) - Body ground Always 10 kΩ or higher
F69-5 (FR-) - Body ground Always 10 kΩ or higher
F69-2 (FL+) - Body ground Always 10 kΩ or higher
F69-6 (FL-) - Body ground Always 10 kΩ or higher



g.

Measure the resistance between each of the front No. 2 speaker assemblies and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
G1-3 (+) - Body ground Always 10 kΩ or higher
G1-1 (-) - Body ground Always 10 kΩ or higher
G5-3 (+) - Body ground Always 10 kΩ or higher
G5-1 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

4.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.

Remove the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.
E226097C36
1.396,1.813 1.042,2.302 false 1.677,1.823 1.542,2.302 false 2.24,1.813 2.604,2.333 false 1.99,1.813 2.125,2.302 false 0.094,0.083 0.25,0.229 0.156,0.146 10 false *a 1.5,2.313 1.656,2.458 0.156,0.146 10 false + 0.948,2.323 1.552,2.552 0.604,0.229 10 false + 2.125,2.344 2.698,2.49 0.573,0.146 10 false - 2.646,2.313 2.76,2.458 0.115,0.146 10 false -
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (+) - 2 (-) Always 10 kΩ or higher
3 (+) - 4 (+) Always Below 1 Ω
1 (-) - 2 (-) Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

5.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

NG

5.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY
a.

Check that the malfunction disappears when a known good speaker is installed.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both the LH and RH side.




Result:
Proceed to
OK
NG



OK

END

NG

6.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
6.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.
E219303C30
0.177,0.146 0.573,0.469 0.396,0.323 10 *a
*a Component without harness connected
(Front No. 1 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω



Result:
Proceed to
OK
NG



OK

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

7.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)
a.

Disconnect the F70 radio and display receiver assembly connector.


b.

Disconnect the J4 and K4 rear speaker assembly connectors.


c.

Measure the resistance between the radio and display receiver assembly and each of the rear speaker assemblies to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F70-1 (RR+) - J4-1 Always Below 1 Ω
F70-3 (RR-) - J4-2 Always Below 1 Ω
F70-2 (RL+) - K4-1 Always Below 1 Ω
F70-6 (RL-) - K4-2 Always Below 1 Ω



d.

Measure the resistance between the radio and display receiver assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F70-1 (RR+) - Body ground Always 10 kΩ or higher
F70-3 (RR-) - Body ground Always 10 kΩ or higher
F70-2 (RL+) - Body ground Always 10 kΩ or higher
F70-6 (RL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

8.INSPECT REAR SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

8.INSPECT REAR SPEAKER ASSEMBLY
a.

Remove the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL


b.
E219303C30
0.177,0.146 0.573,0.469 0.396,0.323 10 *a
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω



Result:
Proceed to
OK
NG



OK

NG

9.CHECK SPEAKER (OPERATION CHECK)
a.
E268474

Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Radio and Display Type)>OPERATION CHECK


b.

Perform the operation check above and determine the speaker that is not operating.

Result:
Not Operating Speaker Proceed to
Front No. 1 speaker assembly A
Front No. 3 speaker assembly B
Rear speaker assembly C
Rear No. 3 speaker assembly D
Front No. 2 speaker assembly E
Rear No. 2 speaker assembly F


HINT:

If sound cannot be heard from any speaker, inspect all of them.




A

10.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY)

B

12.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 3 SPEAKER ASSEMBLY)

C

14.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR SPEAKER ASSEMBLY)

D

16.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR NO. 3 SPEAKER ASSEMBLY)

E

18.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)

F

20.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR NO. 2 SPEAKER ASSEMBLY)
10.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY)
a.

Disconnect the F75 stereo component amplifier assembly connector.


b.

Disconnect the H3 and I3 front No. 1 speaker assembly connectors.


c.

Measure the resistance between the stereo component amplifier assembly and each of the front No. 1 speaker assemblies to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-15 (FR+) - H3-1 Always Below 1 Ω
F75-30 (FR-) - H3-2 Always Below 1 Ω
F75-11 (FL+) - I3-1 Always Below 1 Ω
F75-26 (FL-) - I3-2 Always Below 1 Ω



d.

Measure the resistance between the stereo component amplifier assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-15 (FR+) - Body ground Always 10 kΩ or higher
F75-30 (FR-) - Body ground Always 10 kΩ or higher
F75-11 (FL+) - Body ground Always 10 kΩ or higher
F75-26 (FL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

11.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

11.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.
E219303C30
0.177,0.146 0.573,0.469 0.396,0.323 10 *a
*a Component without harness connected
(Front No. 1 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4.6 to 6.6 Ω



Result:
Proceed to
OK
NG



OK

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

12.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 3 SPEAKER ASSEMBLY)
a.

Disconnect the F75 stereo component amplifier assembly connector.


b.

Disconnect the G3 front No. 3 speaker assembly connector.


c.

Measure the resistance between the stereo component amplifier assembly and the front No. 3 speaker assembly to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-10 (CTR+) - G3-2 Always Below 1 Ω
F75-25 (CTR-) - G3-1 Always Below 1 Ω



d.

Measure the resistance between the stereo component amplifier assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-10 (CTR+) - Body ground Always 10 kΩ or higher
F75-25 (CTR-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

13.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

13.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY
a.

Remove the front No. 3 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.
E222247C29
0.208,0.229 0.521,0.427 0.313,0.198 10 false *a
*a Component without harness connected
(Front No. 3 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 6.8 to 10.2 Ω



Result:
Proceed to
OK
NG



OK

NG

14.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR SPEAKER ASSEMBLY)
a.

Disconnect the F75 stereo component amplifier assembly connector.


b.

Disconnect the J4 and K4 rear speaker assembly connectors.


c.

Measure the resistance between the stereo component amplifier assembly and each of the rear speaker assemblies to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-12 (RR+) - J4-1 Always Below 1 Ω
F75-27 (RR-) - J4-2 Always Below 1 Ω
F75-4 (RL+) - K4-1 Always Below 1 Ω
F75-19 (RL-) - K4-2 Always Below 1 Ω



d.

Measure the resistance between the stereo component amplifier assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-12 (RR+) - Body ground Always 10 kΩ or higher
F75-27 (RR-) - Body ground Always 10 kΩ or higher
F75-4 (RL+) - Body ground Always 10 kΩ or higher
F75-19 (RL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

15.INSPECT REAR SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

15.INSPECT REAR SPEAKER ASSEMBLY
a.

Remove the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL


b.
E219303C30
0.177,0.146 0.573,0.469 0.396,0.323 10 *a
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 5.2 Ω



Result:
Proceed to
OK
NG



OK

NG

16.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR NO. 3 SPEAKER ASSEMBLY)
a.

Disconnect the F75 stereo component amplifier assembly connector.


b.

Disconnect the X23 and X5 rear No. 3 speaker assembly connectors.


c.

Measure the resistance between the stereo component amplifier assembly and each of the rear No. 3 speaker assemblies to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-9 (SR+) - X23-2 Always Below 1 Ω
F75-24 (SR-) - X23-1 Always Below 1 Ω
F75-5 (SL+) - X5-2 Always Below 1 Ω
F75-20 (SL-) - X5-1 Always Below 1 Ω



d.

Measure the resistance between the stereo component amplifier assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-9 (SR+) - Body ground Always 10 kΩ or higher
F75-24 (SR-) - Body ground Always 10 kΩ or higher
F75-5 (SL+) - Body ground Always 10 kΩ or higher
F75-20 (SL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

17.INSPECT REAR NO. 3 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

17.INSPECT REAR NO. 3 SPEAKER ASSEMBLY
a.

Remove the rear No. 3 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>BACK DOOR SPEAKER>REMOVAL


b.
E222247C29
0.208,0.229 0.521,0.427 0.313,0.198 10 false *a
*a Component without harness connected
(Rear No. 3 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 6.8 to 10.2 Ω



Result:
Proceed to
OK
NG



OK

NG

REPLACE REAR NO. 3 SPEAKER ASSEMBLY

18.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)
a.

Disconnect the F75 stereo component amplifier assembly connector.


b.

Disconnect the G2 and G6 front No. 2 speaker assembly connectors.


c.

Measure the resistance between the stereo component amplifier assembly and each of the front No. 2 speaker assemblies to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-14 (TWR+) - G2-4 (TWR+) Always Below 1 Ω
F75-29 (TWR-) - G2-3 (TWR-) Always Below 1 Ω
F75-13 (TWL+) - G6-4 (TWL+) Always Below 1 Ω
F75-28 (TWL-) - G6-3 (TWL-) Always Below 1 Ω



d.

Measure the resistance between the stereo component amplifier assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-14 (TWR+) - Body ground Always 10 kΩ or higher
F75-29 (TWR-) - Body ground Always 10 kΩ or higher
F75-13 (TWL+) - Body ground Always 10 kΩ or higher
F75-28 (TWL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

19.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

19.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.

Remove the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.
E226097C38
1,2.344 1.333,1.781 false 1.969,2.344 1.719,1.813 false 0.094,0.083 0.25,0.229 0.156,0.146 10 false *a 0.646,2.385 1.448,2.781 0.802,0.396 10 false TWR+*A 0.646,2.563 1.448,2.958 0.802,0.396 10 false TWL+*B 1.75,2.375 2.552,2.771 0.802,0.396 10 false TWR-*A 1.75,2.563 2.552,2.958 0.802,0.396 10 false TWL-*B
*A for RH
*B for LH
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (TWR+) - 3 (TWR-) Always 3.4 to 5.2 Ω
4 (TWL+) - 3 (TWL-) Always 3.4 to 5.2 Ω



Result:
Proceed to
OK
NG



OK

NG

20.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR NO. 2 SPEAKER ASSEMBLY)
a.

Disconnect the F75 stereo component amplifier assembly connector.


b.

Disconnect the X26 rear No. 2 speaker assembly connector.


c.

Measure the resistance between the stereo component amplifier assembly and the rear No. 2 speaker assembly to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-8 (WF1+) - X26-4 (WF1+) Always Below 1 Ω
F75-23 (WF1-) - X26-3 (WF1-) Always Below 1 Ω
F75-7 (WF2+) - X26-2 (WF2+) Always Below 1 Ω
F75-22 (WF2-) - X26-1 (WF2-) Always Below 1 Ω



d.

Measure the resistance between the stereo component amplifier assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F75-8 (WF1+) - Body ground Always 10 kΩ or higher
F75-23 (WF1-) - Body ground Always 10 kΩ or higher
F75-7 (WF2+) - Body ground Always 10 kΩ or higher
F75-22 (WF2-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

21.INSPECT REAR NO. 2 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

21.INSPECT REAR NO. 2 SPEAKER ASSEMBLY
a.

Remove the rear No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>BACK DOOR SPEAKER>REMOVAL


b.
E256187C01
0.875,2.167 1.396,1.896 false 1.333,2.323 1.604,1.896 false 2.021,2.323 1.813,1.896 false 2.469,2.208 2.031,1.896 false 0.115,0.115 0.427,0.313 0.313,0.198 10 false *a 0.521,2.167 1.135,2.365 0.615,0.198 10 false WF1+ 1.021,2.365 1.635,2.563 0.615,0.198 10 false WF1- 1.99,2.365 2.604,2.563 0.615,0.198 10 false WF2+ 2.51,2.198 3.125,2.396 0.615,0.198 10 false WF2-
*a Component without harness connected
(Rear No. 2 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (WF2-) - 2 (WF2+) Always 4.8 to 6.8 Ω
3 (WF1-) - 4 (WF1+) Always 4.8 to 6.8 Ω



Result:
Proceed to
OK
NG



OK

NG

REPLACE REAR NO. 2 SPEAKER ASSEMBLY