Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › 2013.12–2016.11
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0103404 AUTOMATIC HIGH BEAM SYSTEM U

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  FAIL-SAFE CHART  


AUTOMATIC HIGH BEAM SYSTEM


The main body ECU (multiplex network body ECU) operates in fail-safe mode if an abnormal condition such as those listed below has been detected.

Item Abnormality Detection Condition Return Condition Warning (Multi-information Display)
Yaw Rate Signal Malfunction Normal yaw rate signal is not detected. Normal yaw rate signal is detected. "CHECK HEADLIGHT SYSTEM"*1 or "Check Headlight System"*2 is displayed
Speed Sensor Signal Malfunction Normal speed sensor signal is not detected. Normal speed sensor signal is detected. "CHECK HEADLIGHT SYSTEM"*1 or "Check Headlight System"*2 is displayed
CAN Communication System Malfunction Normal CAN communication system is not detected. Normal CAN communication system is detected. "CHECK HEADLIGHT SYSTEM"*1 or "Check Headlight System"*2 is displayed
Lane Departure Warning Camera Signal Malfunction Normal lane departure warning camera signal is not detected. Normal lane departure warning camera signal is detected. "CHECK HEADLIGHT SYSTEM"*1 or "Check Headlight System"*2 is displayed

*1: Multi-information Display (for Monochrome Type)

*2: Multi-information Display (for Color Type)