Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT
RM3160E _58 Vehicle Interior _019707 LIGHTING (INT) _0103719 VANITY LIGHT G

LIGHTING (INT)  VANITY LIGHT  INSPECTION  


PROCEDURE

Hide 74320 1.INSPECT VISOR ASSEMBLY LH

a.
E287977
0.417,1.167 1.01,0.906 false 2.417,0.906 2.979,1.125 false 0.156,0.083 0.469,0.281 0.313,0.198 10 false *a 3.031,1.104 3.344,1.302 0.313,0.198 10 false E 0.208,1.135 0.521,1.333 0.313,0.198 10 false +B
*a Component without harness connected
(Visor Assembly LH)


Apply battery voltage to the connector and check that the vanity light comes on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 2 (+B)
Battery negative (-) → 1 (E)
Open the mirror cover Vanity light comes on


If the result is not as specified, replace visor assembly LH.


Hide 74310 2.INSPECT VISOR ASSEMBLY RH

a.
E287977
0.417,1.167 1.01,0.906 false 2.417,0.906 2.979,1.125 false 0.156,0.083 0.469,0.281 0.313,0.198 10 false *a 3.031,1.104 3.344,1.302 0.313,0.198 10 false E 0.208,1.135 0.521,1.333 0.313,0.198 10 false +B
*a Component without harness connected
(Visor Assembly RH)


Apply battery voltage to the connector and check that the vanity light comes on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 2 (+B)
Battery negative (-) → 1 (E)
Open the mirror cover Vanity light comes on


If the result is not as specified, replace visor assembly RH.