81230N
1.INSPECT COURTESY LIGHT ASSEMBLY LH
| *a | Component without harness connected
(Courtesy Light Assembly LH) |
Apply battery voltage to the connector and check that the courtesy light LH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 1 (B)
Battery negative (-) → 2 (SW) |
Always | Courtesy light LH comes on |
If the result is not as specified, replace the bulb or courtesy light assembly LH.
81230M
2.INSPECT COURTESY LIGHT ASSEMBLY RH
| *a | Component without harness connected
(Courtesy Light Assembly RH) |
Apply battery voltage to the connector and check that the courtesy light RH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 1 (B)
Battery negative (-) → 2 (SW) |
Always | Courtesy light RH comes on |
If the result is not as specified, replace the bulb or courtesy light assembly RH.