67604
1.INSPECT REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
| *a | Component without harness connected
(Rear Door Trim Board Sub-assembly LH) |
Apply battery voltage to the connector and check that the rear door ambient light LH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 1 (+)
Battery negative (-) → 2 (-) |
Always | Rear door ambient light LH comes on |
If the result is not as specified, replace the rear door trim board sub-assembly LH.
67603
2.INSPECT REAR DOOR TRIM BOARD SUB-ASSEMBLY RH
| *a | Component without harness connected
(Rear Door Trim Board Sub-assembly RH) |
Apply battery voltage to the connector and check that the rear door ambient light RH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 1 (+)
Battery negative (-) → 2 (-) |
Always | Rear door ambient light RH comes on |
If the result is not as specified, replace the rear door trim board sub-assembly RH.