Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Navigation Receiver Type) › 2013.12–2016.11
RM3160E _56 Audio / Visual / Telematics _019701 NAVIGATION / MULTI INFO DISPLAY _0104171 NAVIGATION SYSTEM(for Navigation Receiver Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  Illumination Circuit  


DESCRIPTION

Power is supplied to the navigation receiver assembly and steering pad switch assembly illumination when the light control switch is in the tail or head position.

WIRING DIAGRAM

E286977E15
0.677,0.677 2.51,0.875 1.833,0.198 10 false from Battery 2.833,1 4.667,1.198 1.833,0.198 10 false TAIL 3.802,0.844 5.635,1.042 1.833,0.198 10 false PANEL 4.844,0.344 6.646,0.729 1.802,0.385 10 false to Main Body ECU (Multiplex Network Body ECU) 0.417,3.99 4.698,4.188 4.281,0.198 10 false Steering Pad Switch Assembly 2.813,3.167 3.938,3.781 1.125,0.615 10 false Spiral Cable Sub-assembly 3.813,2 5.646,2.198 1.833,0.198 10 false 9 3.729,2.177 5.563,2.375 1.833,0.198 10 false F61 3.729,2.75 5.563,2.948 1.833,0.198 10 false F61 3.792,2.573 5.625,2.771 1.833,0.198 10 false 3 3.167,2.104 5,2.302 1.833,0.198 10 false IL+2 3.167,2.667 5,2.865 1.833,0.198 10 false EAU 2.698,2 4.531,2.198 1.833,0.198 10 false 1 2.688,2.177 4.521,2.375 1.833,0.198 10 false z4 2.688,2.74 4.521,2.938 1.833,0.198 10 false z4 2.708,2.573 4.542,2.771 1.833,0.198 10 false 8 5.542,2 6.771,2.198 1.229,0.198 10 false 10 3.719,5.063 5.552,5.26 1.833,0.198 10 false 12 5.49,2.188 6.719,2.385 1.229,0.198 10 false F114 5.885,2.198 7.115,2.396 1.229,0.198 10 false ILL+ 5.49,2.75 6.719,2.948 1.229,0.198 10 false F116 5.552,2.563 6.781,2.76 1.229,0.198 10 false 23 5.875,2.76 7.104,2.958 1.229,0.198 10 false SWG 5.49,5.167 6.719,5.365 1.229,0.198 10 false F115 5.604,4.99 6.833,5.188 1.229,0.198 10 false 5 5.875,5.188 7.104,5.385 1.229,0.198 10 false ILL- 2.469,5.51 4.302,5.708 1.833,0.198 10 false F22 3.396,5.177 4.625,5.375 1.229,0.198 10 false ILL- 2.458,5.677 4.406,5.917 1.948,0.24 10 false Combination Meter Assembly 5.26,6 7.115,6.24 1.854,0.24 10 false Navigation Receiver Assembly

CAUTION / NOTICE / HINT

NOTICE:
·

The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION

·

Inspect the fuses for circuits related to this system before performing the following procedure.



PROCEDURE

1.CHECK ILLUMINATION
a.

Check if the illumination for the navigation receiver assembly, steering pad switch assembly, heater control switch or others (hazard switch, transmission control switch, etc.) comes on when the light control switch is turned to the head or tail position.

Result:
Result Proceed to
Illumination comes on for all components except steering pad switch assembly. A
Illumination comes on for all components except navigation receiver assembly. B
Illumination comes on only for steering pad switch assembly. C
No illumination comes on (navigation receiver assembly, hazard switch, heater control switch, etc.). D




A

2.CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)

B

5.CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)

C

D

2.CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)
a.

Disconnect the F61 spiral cable sub-assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
F61-9 (IL+2) - Body ground Light control switch in tail or head position 11 to 14 V



Result:
Proceed to
OK
NG



OK

3.INSPECT STEERING PAD SWITCH ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.INSPECT STEERING PAD SWITCH ASSEMBLY
a.

Remove the steering pad switch assembly.

Click hereSteering>STEERING COLUMN>STEERING PAD SWITCH>REMOVAL


b.

Connect a battery positive (+) lead to terminal 1 (IL+2) and a negative (-) lead to terminal 8 (EAU) of the steering pad switch assembly connector.

E284057C02
4.219,0.833 4.49,0.573 false 4.042,0.188 4.417,0.49 false 0.125,0.115 0.438,0.271 0.313,0.156 10 false *a 3.74,0.052 4.24,0.26 0.5,0.208 10 false IL+2 3.979,0.844 4.479,1.052 0.5,0.208 10 false EAU
*a Component without harness connected
(Steering Pad Switch Assembly)
- -



c.

Check if the illumination for the steering pad switch assembly comes on.

OK:

Illumination for the steering pad switch assembly comes on.



Result:
Proceed to
OK
NG



OK

4.INSPECT SPIRAL CABLE SUB-ASSEMBLY

NG

REPLACE STEERING PAD SWITCH ASSEMBLY

4.INSPECT SPIRAL CABLE SUB-ASSEMBLY
a.

Remove the spiral cable sub-assembly.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>SPIRAL CABLE>REMOVAL


b.
E268445C25
1.583,0.292 1.906,0.49 0.323,0.198 1.583,3.417 1.906,3.615 0.323,0.198 2.01,0.865 2.333,0.552 false 2.26,1.146 1.906,1.01 false 2.104,3.563 1.844,3.99 false 1.969,4.125 2.344,4.208 false 0.135,0.115 0.448,0.313 0.313,0.198 10 false *a 0.75,0.219 1.063,0.417 0.313,0.198 10 false *b 1.677,0.313 1.99,0.51 0.313,0.198 10 false z4 2.333,0.375 2.667,0.573 0.333,0.198 10 false IL+2 2.302,1.094 2.677,1.292 0.375,0.198 10 false EAU 0.74,3.313 1.052,3.51 0.313,0.198 10 false *c 1.635,3.427 1.948,3.625 0.313,0.198 10 false F61 2.115,3.385 2.49,3.583 0.375,0.198 10 false EAU 2.396,4.146 2.896,4.375 0.5,0.229 10 false IL+2
*a Component without harness connected
(Spiral Cable Sub-assembly)
*b Steering Pad Switch Assembly Side
*c Vehicle Side


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
z4-1 (IL+2) - F61-9 (IL+2) Center 3 Ω or less
2.5 rotations to the left
2.5 rotations to the right
z4-8 (EAU) - F61-3 (EAU) Center 3 Ω or less
2.5 rotations to the left
2.5 rotations to the right



c.

After setting the spiral cable sub-assembly to the center position, rotate the spiral cable sub-assembly 2.5 times clockwise. Then while rotating the spiral cable sub-assembly 5 times counterclockwise, measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
z4-1 (IL+2) - F61-9 (IL+2) Always 3 Ω or less
z4-8 (EAU) - F61-3 (EAU) Always 3 Ω or less


NOTICE:
·

Press and hold the lock located in the center of the spiral cable sub-assembly to rotate the spiral cable sub-assembly.

·

The spiral cable sub-assembly is an important part of the SRS airbag system. Incorrect removal or installation of the spiral cable sub-assembly may prevent the airbag from deploying.

·

As the spiral cable sub-assembly may break, do not rotate the spiral cable sub-assembly more than the specified amount.




Result:
Proceed to
OK
NG



OK

REPAIR OR REPLACE HARNESS OR CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - BODY GROUND - SPIRAL CABLE SUB-ASSEMBLY)

NG

REPLACE SPIRAL CABLE SUB-ASSEMBLY

5.CHECK HARNESS AND CONNECTOR (ILLUMINATION SIGNAL)
a.

Disconnect the F114 navigation receiver assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
F114-10 (ILL+) - Body ground Light control switch in tail or head position 11 to 14 V



Result:
Proceed to
OK
NG



OK

6.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - COMBINATION METER ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

6.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - COMBINATION METER ASSEMBLY)
a.

Disconnect the F115 navigation receiver assembly connector.


b.

Disconnect the F22 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F115-5 (ILL-) - F22-12 (ILL-) Always Below 1 Ω
F115-5 (ILL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR