Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM
RM3160E _58 Vehicle Interior _019708 METER / GAUGE / DISPLAY _0104486 METER / GAUGE SYSTEM W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Warning or Display.


v.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.


Warning
Tester Display Description Default Setting ECU
Flasher Sound Volume Adjustment Function to change the flasher sound volume Medium 10:Large,00:Medium,01:Small Combination meter assembly
Lane Change Flashing Times Setting Function to change the lane change flashing times 3 00:OFF,01:3,10:5,11:7 Combination meter assembly
50006 7
Display
Tester Display Description Default Setting ECU
ECO Drive Indicator Zone Function to change the eco drive indicator zone ON 0:OFF,1:ON Combination meter assembly
ODO Display Time After IG OFF Setting Function to change the ODO display time after the ignition switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly
50006 14