Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
RM3160E _55 Steering _019697 POWER ASSIST SYSTEMS _0104490 POWER STEERING SYSTEM G

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. CHECK STEERING EFFORT (TORQUE)

NOTICE:

These service operations may affect the SRS airbags. Be sure to read the precautionary notices concerning the SRS airbag system before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION


a.

Stop the vehicle on a level, paved surface and align the wheels straight ahead.


b.

c.

Connect the cable to the negative (-) battery terminal.


d.

Using a torque wrench, check that the steering wheel set nut is properly tightened.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


e.

Start the engine so that the power steering is ready to operate.


f.

Turn the steering wheel 90 degrees to the right and check steering effort (torque) with the steering wheel turned. Check in the opposite direction using the same method.

Standard Steering Effort (Reference):

6.5 N*m (66 kgf*cm, 58 in.*lbf) or less



g.

Align the front wheels facing straight ahead.


h.

Turn the ignition switch off.


i.

Disconnect the cable from the negative (-) battery terminal.


j.