Home › Engine / Hybrid System › 1AR-FE INTAKE / EXHAUST › INTAKE AIR CONTROL VALVE ACTUATOR(for TCV)
RM3160E _51 Engine / Hybrid System _019675 1AR-FE INTAKE / EXHAUST _0104503 INTAKE AIR CONTROL VALVE ACTUATOR(for TCV) G

1AR-FE INTAKE / EXHAUST  INTAKE AIR CONTROL VALVE ACTUATOR(for TCV)  INSPECTION  


PROCEDURE

Hide 17335 1.INSPECT INTAKE AIR CONTROL VALVE ACTUATOR (for TCV)

a.

Check the intake air control valve actuator (for TCV) operation.

i.
A197176
0.969,3.073 1.042,3.073 1.042,3.073 1.094,2.708 false 1.406,3.073 1.323,3.073 1.323,3.073 1.26,2.708 false 0.448,2.979 0.938,3.177 0.49,0.198 10 false 5 (M+) 1.49,2.979 1.938,3.177 0.448,0.198 10 false 4 (M-)

Check that the motor operates when the battery is connected to the terminals of the intake air control valve actuator (for TCV).

NOTICE:

Apply battery voltage for 1 to 3 seconds.

If battery voltage is applied for more than 3 seconds, the intake air control valve actuator (for TCV) may be damaged.

If the positive (+) and negative (-) battery leads contact the sensor terminals, the intake air control valve actuator (for TCV) may be damaged.


Standard:
Tester Connection Specified Condition
Positive (+) battery voltage applied to terminal 4 (M-) and negative (-) battery voltage applied to terminal 5 (M+) Gear rotates clockwise
Positive (+) battery voltage applied to terminal 5 (M+) and negative (-) battery voltage applied to terminal 4 (M-) Gear rotates counterclockwise


If the result is not as specified, replace the intake air control valve actuator (for TCV).