Home › Engine / Hybrid System › 2GR-FE LUBRICATION › OIL PUMP › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019668 2GR-FE LUBRICATION _0105664 OIL PUMP G

2GR-FE LUBRICATION  OIL PUMP  INSPECTION  


PROCEDURE

Hide 15131 1.INSPECT OIL PUMP RELIEF VALVE

a.
A094628

Coat the oil pump relief valve with engine oil and check that it falls smoothly into the valve hole by its own weight.

If the oil pump relief valve does not fall smoothly, replace the oil pump relief valve. If necessary, replace the timing chain cover sub-assembly.


Hide 15102 2.INSPECT OIL PUMP ROTOR SET

a.

Apply engine oil to the drive rotor and driven rotor.


b.
A190462C09
1.469,0.146 0.927,0.146 true 1.063,0.146 1.063,1.094 1.063,1.094 1.438,1.094 true 0.729,0.052 0.917,0.229 0.188,0.177 10 false *a
*a Rotor Mark


Install the drive rotor and driven rotor to the timing chain cover sub-assembly with the rotor marks facing up. Check that the rotors rotate smoothly.

If the rotors do not rotate smoothly, replace the timing chain cover sub-assembly.


c.
A121022C05
1.073,0.406 1.688,0.875 true 0.875,0.292 1.208,0.552 0.333,0.26 10 false *a
*a Feeler Gauge


Check the tip clearance.

i.

Using a feeler gauge, measure the clearance between the drive rotor and driven rotor tips as shown in the illustration.

Standard Tip Clearance:

0.060 to 0.160 mm (0.00236 to 0.00630 in.)


Maximum Tip Clearance:

0.160 mm (0.00630 in.)


If the tip clearance is more than the maximum, replace the oil pump rotor set.



d.
A121023C05
1.917,1.115 2.344,0.375 true 1.438,1.063 0.927,0.427 true 0.75,0.292 1.063,0.51 0.313,0.219 10 false *a 2.292,0.198 2.625,0.417 0.333,0.219 10 false *b
*a Precision Straightedge
*b Feeler Gauge


Check the side clearance.

i.

Using a feeler gauge and precision straightedge, measure the clearance between the drive rotor and driven rotor and precision straightedge as shown in the illustration.

Standard Side Clearance:

0.030 to 0.090 mm (0.00118 to 0.00354 in.)


Maximum Side Clearance:

0.090 mm (0.00354 in.)


If the side clearance is more than the maximum, replace the oil pump rotor set. If necessary, replace the timing chain cover sub-assembly.



e.
A121024C05
1.698,0.875 1.052,0.406 true 0.854,0.302 1.167,0.542 0.313,0.24 10 false *a
*a Feeler Gauge


Check the body clearance.

i.

Using a feeler gauge, measure the clearance between the timing chain cover sub-assembly and driven rotor as shown in the illustration.

Standard Body Clearance:

0.250 to 0.325 mm (0.00984 to 0.0128 in.)


Maximum Body Clearance:

0.325 mm (0.0128 in.)


If the body clearance is more than the maximum, replace the oil pump rotor set. If necessary, replace the timing chain cover sub-assembly.