Home › Engine / Hybrid System › 2GR-FE LUBRICATION › OIL PUMP › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019668 2GR-FE LUBRICATION _0105664 OIL PUMP A

2GR-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 15102 1.INSTALL OIL PUMP ROTOR SET

a.
A190462C09
1.469,0.146 0.927,0.146 true 1.063,0.146 1.063,1.094 1.063,1.094 1.438,1.094 true 0.729,0.052 0.917,0.229 0.188,0.177 10 false *a
*a Rotor Mark


Coat the drive rotor and driven rotor with engine oil and place them into the timing chain cover sub-assembly with the rotor marks facing up. Check that the rotors rotate smoothly.


Hide 15115 2.INSTALL OIL PUMP COVER

a.
A094627N05
0.958,1.219 0.938,1.25 false 1.604,0.094 1.76,0.292 0.156,0.198 10 true A 0.958,0.542 1.115,0.74 0.156,0.198 10 true A 2.125,0.615 2.281,0.813 0.156,0.198 10 true A 2.521,1.292 2.677,1.49 0.156,0.198 10 true B 2.052,1.979 2.208,2.177 0.156,0.198 10 true B 1,1.979 1.156,2.177 0.156,0.198 10 true B 0.458,1.521 0.615,1.719 0.156,0.198 10 true B 0.604,1.156 0.76,1.354 0.156,0.198 10 true B

Install the oil pump cover with the 8 bolts.

Torque:
9.1 N*m (93 kgf*cm, 81 in.*lbf)

Bolt Length
Item Length
Bolt (A) 22 mm (0.866 in.)
Bolt (B) 40 mm (1.57 in.)


Hide 15131 3.INSTALL OIL PUMP RELIEF VALVE

a.

Coat the oil pump relief valve with engine oil.


b.

Insert the oil pump relief valve and oil pump relief valve spring into the oil pump cover hole.


c.
A128008

Using a 27 mm socket wrench, install the oil pump relief valve plug.

Torque:
49.1 N*m (501 kgf*cm, 36 ft.*lbf)