Home › Vehicle Exterior › HORN › HORN
RM3160E _59 Vehicle Exterior _019723 HORN _0105901 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.INSPECT HIGH PITCHED HORN ASSEMBLY (for RHD)

a.
E276415
1.302,0.927 1.833,0.719 false 0.854,0.177 1.396,0.25 false 0.135,0.094 0.448,0.25 0.313,0.156 10 false *a 0.656,0.073 0.969,0.229 0.313,0.156 10 false *b 1.896,0.615 2.292,0.792 0.396,0.177 10 false A2-1
*a Component without harness connected
(High Pitched Horn Assembly)
*b Body ground


Apply battery voltage and check the operation of the high pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal A2-1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 2.INSPECT LOW PITCHED HORN ASSEMBLY (for RHD)

a.
E276416
1.292,0.927 1.792,0.698 false 0.917,0.146 1.396,0.208 false 0.104,0.073 0.417,0.229 0.313,0.156 10 false *a 0.729,0.063 1.042,0.219 0.313,0.156 10 false *b 1.865,0.604 2.271,0.813 0.406,0.208 10 false A1-1
*a Component without harness connected
(Low Pitched Horn Assembly)
*b Body ground


Apply battery voltage and check the operation of the low pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal A1-1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the low pitched horn assembly.


Hide 86510 3.INSPECT HIGH PITCHED HORN ASSEMBLY (for LHD)

a.
E276461
1.281,1.021 1.823,0.688 false 0.875,0.198 1.333,0.26 false 0.094,0.083 0.406,0.24 0.313,0.156 10 false *a 0.677,0.083 0.99,0.24 0.313,0.156 10 false *b 1.885,0.594 2.292,0.781 0.406,0.188 10 false A2-1
*a Component without harness connected
(High Pitched Horn Assembly)
*b Body ground


Apply battery voltage and check the operation of the high pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal A2-1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 4.INSPECT LOW PITCHED HORN ASSEMBLY (for LHD)

a.
E276462
1.229,1.073 1.844,0.698 false 0.844,0.198 1.313,0.24 false 0.115,0.073 0.427,0.229 0.313,0.156 10 false *a 0.646,0.115 0.958,0.271 0.313,0.156 10 false *b 1.906,0.583 2.292,0.771 0.385,0.188 10 false A1-1
*a Component without harness connected
(Low Pitched Horn Assembly)
*b Body ground


Apply battery voltage and check the operation of the low pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal A1-1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the low pitched horn assembly.