Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF HOUSING
RM3160E _59 Vehicle Exterior _019718 SLIDING ROOF / CONVERTIBLE _0106111 SLIDING ROOF HOUSING A

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF HOUSING  DISASSEMBLY  


PROCEDURE

Hide 63260A 1.REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY

a.
B359422
2.479,1.792 2.594,1.302 true 2.677,1.979 2.792,1.49 true 2.615,1.979 2.927,2.135 0.313,0.156 10 false *a 2.417,1.802 2.729,1.958 0.313,0.156 10 false *b
*a Guide
*b Pin


Disengage the claw.


b.

Disengage the guide and pin to remove the map light bracket.


c.
B359423

Remove the 2 bolts and sliding roof drive gear sub-assembly.


Hide 63306 2.REMOVE SUNSHADE TRIM SUB-ASSEMBLY

a.

Remove the 2 screws.

B359424


b.

Disengage the guide and remove the sliding roof piece sub-assembly LH.

HINT:

Use the same procedure for the RH side.



c.
B359425

Slide and remove the sunshade trim sub-assembly.


Hide 63205A 3.REMOVE SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY

NOTICE:

Do not disassemble the sliding roof drive cable sub-assembly except when replacing it.


a.

Using a screwdriver, disengage the 2 claws in the direction indicated by the arrow (1) in the illustration.

B359427
1.177,0.677 1.594,0.594 false 5.563,1.833 5.979,1.917 false 1.615,0.51 1.927,0.667 0.313,0.156 10 false *a 5.417,1.74 5.729,1.896 0.313,0.156 10 false *a 0.833,1.115 0.99,1.313 0.156,0.198 10 false 1 6.177,2.406 6.333,2.604 0.156,0.198 10 false 1 4.667,0.625 4.823,0.823 0.156,0.198 10 false 2
*a Protective Tape - -


HINT:

Tape the screwdriver tip before use.



b.

Slide the rear roof drip channel in the direction indicated by the arrow (2) in the illustration to remove it.


c.
B359429

Hold down the roof wind deflector panel sub-assembly.


d.

Using a screwdriver, slide the sliding roof drive cable sub-assembly as shown in the illustration to remove it.

B359430
1.031,0.542 1.365,0.708 false 5.771,1.917 6.104,1.75 false 1.396,0.635 1.708,0.792 0.313,0.156 10 false *a 5.625,1.833 5.938,1.99 0.313,0.156 10 false *a
*a Protective Tape - -


HINT:

Tape the screwdriver tip before use.