Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows)
RM3160E _59 Vehicle Exterior _019717 WINDOW / GLASS _0106114 POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows) U

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows)  FAIL-SAFE CHART  


PULSE FAILURE OR DISPLACEMENT OF NON-DETECTION RANGE TO THE OPENING DIRECTION


a.

If the pulse sensor built into the power window regulator motor malfunctions, the power window control system enters fail-safe mode.

Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Ignition switch ON Ignition switch off
(Key-off operation permitted)
Ignition switch off
(Key-off operation prohibited)
Manual up (Driver door window) X X -
Manual down (Driver door window) ○ X -
Auto up (Driver door window)
(hold switch at auto up position)
○* X -
Auto up (Driver door window) X X -
Auto down (Driver door window) X X -
Manual up (Remote switch operation) X X -
Manual down (Remote switch operation) X X -
Auto up (Remote switch operation)
(hold switch at auto up position)
X X -
Auto up (Remote switch operation) X X -
Auto down (Remote switch operation) X X -
Key-linked open and close - X X
Wireless transmitter-linked open and close - X X

Power Window Regulator Switch Assembly
Power Window Operation Condition
Ignition switch ON Ignition switch off
(Key-off operation permitted)
Ignition switch off
(Key-off operation prohibited)
Manual up X X -
Manual down ○ X -
Auto up
(hold switch at auto up position)
○* X -
Auto up X X -
Auto down X X -
Key-linked open and close - X X
Wireless transmitter-linked open and close - X X

HINT:
·

○: Operates

·

X: Operation prohibited

·

*: Operates in manual mode without jam protection



Fail-safe deactivation condition

When the pulse sensor is normal, to deactivate fail-safe mode, pull up the power window switch to the auto up position and hold it for at least 1 second to fully close the window from the fully opened position. As a result, the auto up and down function will return.




INITIAL FAILURE


a.

During initialization of the power window regulator motor ECU, when the window position or initialization complete status cannot be properly read from the EEPROM, the power window control system prohibits operation as follows.

Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Ignition switch ON Ignition switch off
(Key-off operation permitted)
Ignition switch off
(Key-off operation prohibited)
Manual up (Driver door window) X X -
Manual down (Driver door window) ○ X -
Auto up (Driver door window)
(hold switch at auto up position)
○* X -
Auto up (Driver door window) X X -
Auto down (Driver door window) X X -
Manual up (Remote switch operation) X X -
Manual down (Remote switch operation) X X -
Auto up (Remote switch operation)
(hold switch at auto up position)
X X -
Auto up (Remote switch operation) X X -
Auto down (Remote switch operation) X X -
Key-linked open and close - X X
Wireless transmitter-linked open and close - X X

Power Window Regulator Switch Assembly
Power Window Operation Condition
Ignition switch ON Ignition switch off
(Key-off operation permitted)
Ignition switch off
(Key-off operation prohibited)
Manual up X X -
Manual down ○ X -
Auto up
(hold switch at auto up position)
○* X -
Auto up X X -
Auto down X X -
Key-linked open and close - X X
Wireless transmitter-linked open and close - X X

HINT:
·

○: Operates

·

X: Operation prohibited

·

*: Operates in manual mode without jam protection



Fail-safe deactivation condition

Initialize the power window regulator motor assembly (for driver door) or power window regulator motor assembly (for front passenger door).

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows)>INITIALIZATION




LIN COMMUNICATION FAILURE


a.

If the LIN communication line is malfunctioning (communication stop), the power window control system prohibits operation as follows.

Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Ignition switch ON
Manual up ○*
Manual down ○
Auto up (hold switch at auto up position) -
Auto up -
Auto down -

Power Window Regulator Switch Assembly
Power Window Operation Condition
Ignition switch ON
Manual up ○*
Manual down ○
Auto up (hold switch at auto up position) ○*
Auto up ○*
Auto down ○

HINT:
·

○: Operates

·

X: Operation prohibited

·

*: Jam protection can operate.

·

Remote up and down function does not operate.



Fail-safe deactivation condition



PULSE FAILURE AND LIN COMMUNICATION FAILURE


a.

If the LIN communication line is malfunctioning (communication stop) and the pulse sensor for the jam protection function is malfunctioning, the power window control system prohibits operation as follows.

Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Always
Manual up X
Manual down X
Auto up (hold switch at auto up position) X
Auto up X
Auto down X

Power Window Regulator Switch Assembly
Power Window Operation Condition
Always
Manual up X
Manual down X
Auto up (hold switch at auto up position) X
Auto up X
Auto down X

HINT:
·

○: Operates

·

X: Operation prohibited

·

Driver door window: When the jam protection function does not operate due to the LIN communication failure, the manual up and auto up functions will not operate.

·

Remote switch operation: Not operative during the LIN communication failure





DISPLACEMENT OF NON-DETECTION RANGE TO THE OPENING DIRECTION AND LIN COMMUNICATION FAILURE / INITIAL FAILURE AND LIN COMMUNICATION FAILURE


a.

If the LIN communication line is malfunctioning (communication stop) and the window position or the learned value is abnormal, the power window control system prohibits operation as follows.

Power Window Regulator Master Switch Assembly
Power Window Operation Condition
Always
Manual up ○*
Manual down ○
Auto up (hold switch at auto up position) -
Auto up -
Auto down -

Power Window Regulator Switch Assembly
Power Window Operation Condition
Always
Manual up ○*
Manual down ○
Auto up (hold switch at auto up position) ○*
Auto up X
Auto down X

HINT:
·

○: Operates

·

X: Operation prohibited

·

Remote switch operation: Operation is not possible during the LIN communication failure.

·

*: Jam protection can operate and the window reverses upon reaching the fully closed position.