Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows)
RM3160E _59 Vehicle Exterior _019717 WINDOW / GLASS _0106114 POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows) W

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Front Door Windows)  CUSTOMIZE PARAMETERS  


CUSTOMIZE POWER WINDOW CONTROL SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make notes of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Power Window.


v.

Select the setting by referring to the table below.

Power Window
Tester Display Description Default Setting ECU
Door Key P/W Up This function is used to close the front door power windows by operating the mechanical key. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Door Key P/W Down This function is used to open the front door power windows by operating the mechanical key. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
P/W Up W/ Transmit This function is used to close the front door power windows using the wireless key transmitter. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
P/W Down W/ Transmit This function is used to open the front door power windows using the wireless key transmitter. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
P Window Auto Up This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly. Avail 0:Not Avl,1:Avail Power window regulator motor assembly (for Front Passenger Door)
P Window Auto Up From Driver This function is used to enable or disable the remote auto up function for the front passenger door window using the power window regulator master switch assembly. Avail 0:Not Avl,1:Avail Power window regulator motor assembly (for Front Passenger Door)
50006 4

vi.

Enter the following menus: Customize Setting / Wireless Door Lock.


vii.

Select the setting by referring to the table below.

Wireless Door Lock
Tester Display Description Default Setting ECU
P/W Wireless Ope Buzz This function turns the wireless power window buzzer response on or off. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 1