Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD DEICER SWITCH
RM3160E _59 Vehicle Exterior _019717 WINDOW / GLASS _0106122 WINDSHIELD DEICER SWITCH G

WINDOW / GLASS  WINDSHIELD DEICER SWITCH  INSPECTION  


PROCEDURE

Hide 84871 1.INSPECT OUTER MIRROR HEATER SWITCH ASSEMBLY

a.
B364272
0.167,1.75 0.417,1.917 0.25,0.167 10 false *a
*a Component without harness connected
(Outer Mirror Heater Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 4 Outer mirror heater switch assembly on Below 1 Ω
1 - 4 Outer mirror heater switch assembly off 10 kΩ or higher


If the result is not as specified, replace the outer mirror heater switch assembly.


b.
B364272
2.083,0.906 2.531,0.906 false 2.708,1.167 3.156,1.167 false 0.167,1.75 0.417,1.917 0.25,0.167 10 false *c 1.917,0.823 2.167,0.99 0.25,0.167 10 false *a 3.198,1.083 3.396,1.25 0.198,0.167 10 false *b
*a Indicator Light
*b Illumination
*c Component without harness connected
(Outer Mirror Heater Switch Assembly)


Check that the indicator light illuminates.

OK:
Tester Connection Specified Condition
Battery positive (+) → 3
Battery negative (-) → 2
Outer mirror heater switch assembly indicator illuminates


If the result is not as specified, replace the outer mirror heater switch assembly.


c.

Check that the illumination illuminates.

OK:
Tester Connection Specified Condition
Battery positive (+) → 1
Battery negative (-) → 5
Outer mirror heater switch assembly illumination illuminates


If the result is not as specified, replace the outer mirror heater switch assembly.