This is the power source circuit to operate the television display assembly.
Inspect the fuses for circuits related to this system before performing procedure.
Disconnect the S8 television display assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| S8-17 (GND) - Body ground | Always | Below 1 Ω |
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| S8-1 (+B) - S8-17 (GND) | Always | 11 to 14 V |
| S8-2 (ACC) - S8-17 (GND) | Engine switch on (ACC) | 11 to 14 V |
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR SEAT ENTERTAINMENT SYSTEM>PROBLEM SYMPTOMS TABLE
NG