Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR SEAT ENTERTAINMENT SYSTEM
RM3160E _56 Audio / Visual / Telematics _019700 AUDIO / VIDEO _0106249 REAR SEAT ENTERTAINMENT SYSTEM D

AUDIO / VIDEO  REAR SEAT ENTERTAINMENT SYSTEM  OPERATION CHECK  


START DIAGNOSTIC MODE


a.

Enter diagnostic mode.

i.

Turn the engine switch on (IG).


ii.

While pressing and holding the "SETTING" switch on the rear switch and volume assembly, operate the light control switch: Off → Tail → Off → Tail → Off → Tail → Off.


iii.

Diagnostic mode starts and the "REAR Check" screen will be displayed.




COLOR BAR CHECK


HINT:
·

Use the rear switch and volume assembly for each inspection.

·

This mode checks the color display on the television display assembly.

·

The television display assembly is not a touch panel type display. Do not touch the screen.

·

Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.



a.
E277847

Select "Color Bar Check".


b.
E234000

Color Bar Check

i.

Check the display color.

HINT:
·

The entire screen turns to the color or stripe selected.

·

The screen returns to the "Color Bar Check" screen if the rear switch and volume assembly is operated again.






REMOTE COMMANDER CHECK


HINT:
·

Use the rear switch and volume assembly for each inspection.

·

The rear switch and volume assembly switches are checked in the following procedure.

·

The television display assembly is not a touch panel type display. Do not touch the screen.

·

Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.



a.
E277848

Select "Remote Commander Check".


b.
E234001
0.139,1.146 0.311,1.306 0.172,0.16 10 *a 0.67,1.245 0.356,1.245 false

Remote Commander Check

i.

Operate each switch and check that the switch name is correctly displayed.

Screen Description
Display Content
*a: Name of switch being pushed Name of the pushed switch is displayed




START SCREEN LANGUAGE


HINT:
·

Use the rear switch and volume assembly for each inspection.

·

The language for the start screen is selected in this procedure.

·

The television display assembly is not a touch panel type display. Do not touch the screen.

·

Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.



a.
E277849

Select "Start Screen Language".


b.
E277850

Select the language for the start screen.



FINISH DIAGNOSTIC MODE


a.

Turn the engine switch off.