The television display assembly sends the sound signal to the navigation receiver assembly via this circuit.
Disconnect the S8 television display assembly connector.
Disconnect the F118 navigation receiver assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| S8-7 (L1+) - F118-4 (CDL+) | Always | Below 1 Ω |
| S8-8 (L1-) - F118-5 (CDL-) | Always | Below 1 Ω |
| S8-9 (R1+) - F118-2 (CDR+) | Always | Below 1 Ω |
| S8-10 (R1-) - F118-3 (CDR-) | Always | Below 1 Ω |
| S8-11 (SLD1) - F118-1 (CSLD) | Always | Below 1 Ω |
| S8-7 (L1+) - Body ground | Always | 10 kΩ or higher |
| S8-8 (L1-) - Body ground | Always | 10 kΩ or higher |
| S8-9 (R1+) - Body ground | Always | 10 kΩ or higher |
| S8-10 (R1-) - Body ground | Always | 10 kΩ or higher |
| S8-11 (SLD1) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR SEAT ENTERTAINMENT SYSTEM>PROBLEM SYMPTOMS TABLE
NG