Home › Engine / Hybrid System › 1AR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM3160E _51 Engine / Hybrid System _019671 1AR-FE ENGINE CONTROL _0106849 CAMSHAFT OIL CONTROL VALVE A

1AR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 11101J 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)

a.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.


b.

Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.




c.

Connect the camshaft timing oil control valve assembly connector.


Hide 11101J 2.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)

a.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.


b.

Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.




c.

Connect the camshaft timing oil control valve assembly connector.


Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY