Home › Engine / Hybrid System › 1AR-FE ENGINE CONTROL › THROTTLE BODY
RM3160E _51 Engine / Hybrid System _019671 1AR-FE ENGINE CONTROL _0106850 THROTTLE BODY A

1AR-FE ENGINE CONTROL  THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 12601B 2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 17705 3.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

a.
A316189

Disconnect the mass air flow meter sub-assembly connector and disengage the wire harness clamp.


b.

Disengage the hose clamp and disconnect the vacuum switching valve assembly from the No. 1 air cleaner hose.


c.
A316190

Slide the clip and disconnect the ventilation hose from the cylinder head cover sub-assembly.


d.
A313507

Disengage the 2 air cleaner cap clamps.


e.
A313506

Loosen the hose clamp and remove the air cleaner cap with air cleaner hose from the throttle body with motor assembly.


Hide 22030 4.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A205943

Disconnect the throttle body with motor assembly connector.


b.

Disengage the fuel tube sub-assembly from the clamp.


c.
A205944C01
0.708,0.521 0.885,0.521 0.885,0.521 1.365,1 true 0.813,1.75 1.094,1.75 1.094,1.75 1.573,1.323 true 0.531,0.438 0.844,0.646 0.313,0.208 10 false *1 0.594,1.667 0.802,1.875 0.208,0.208 10 true *2
*1 No. 1 Water By-pass Hose
*2 No. 2 Water By-pass Hose


Slide the 2 clips and disconnect the No. 1 water by-pass hose and No. 2 water by-pass hose from the throttle body with motor assembly.


d.
A205945

Remove the 4 bolts and throttle body with motor assembly from the intake manifold.

NOTICE:

If the throttle body with motor assembly has been struck or dropped, replace it.



Hide 23881B 5.REMOVE FUEL HOSE BRACKET

a.
A315104

Remove the bolt and fuel hose bracket from the throttle body with motor assembly.


Hide 22271 6.REMOVE THROTTLE BODY GASKET

a.
A195071

Remove the throttle body gasket from the intake manifold.