Home › Engine / Hybrid System › 1AR-FE ENGINE CONTROL › ACCELERATOR PEDAL
RM3160E _51 Engine / Hybrid System _019671 1AR-FE ENGINE CONTROL _0106852 ACCELERATOR PEDAL A

1AR-FE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid physical shock to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

The accelerator pedal sensor assembly does not require lubrication.

·

Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.



a.
A313511

Disconnect the accelerator pedal sensor assembly connector.


b.

Remove the 2 nuts and accelerator pedal sensor assembly.

NOTICE:

If the accelerator pedal sensor assembly has been struck or dropped, replace it.