Home › Engine / Hybrid System › 1AR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR › 2013.12–2015.11
RM3160E _51 Engine / Hybrid System _019671 1AR-FE ENGINE CONTROL _0106854 CAMSHAFT POSITION SENSOR A

1AR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11102A 1.INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)

a.
A192239
1.24,1.969 1.594,1.969 1.594,1.969 1.76,1.563 false 1.063,1.865 1.375,2.021 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of the bolt for the camshaft position sensor.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.



b.
A231950C03
1.708,0.51 1.427,0.198 1.427,0.198 1.167,0.198 false 0.979,0.115 1.292,0.313 0.313,0.198 10 false *a
*a O-ring


Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


c.

Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft position sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or does not move out of place during installation.




d.

Connect the camshaft position sensor connector.


Hide 11102A 2.INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.
A192239
1.24,1.969 1.594,1.969 1.594,1.969 1.76,1.563 false 1.063,1.865 1.375,2.021 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of the bolt for the camshaft position sensor.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.



b.
A231950C03
1.708,0.51 1.427,0.198 1.427,0.198 1.167,0.198 false 0.979,0.115 1.292,0.313 0.313,0.198 10 false *a
*a O-ring


Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


c.

Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft position sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or does not move out of place during installation.




d.

Connect the camshaft position sensor connector.


Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY