Home › Engine / Hybrid System › 1AR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM3160E _51 Engine / Hybrid System _019671 1AR-FE ENGINE CONTROL _0106854 CAMSHAFT POSITION SENSOR A

1AR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 11102A 2.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.
A195076

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If the camshaft position sensor has been struck or dropped, replace it.



Hide 11102A 3.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)

a.
A315105

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If the camshaft position sensor has been struck or dropped, replace it.