Home › Engine / Hybrid System › 1AR-FE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR
RM3160E _51 Engine / Hybrid System _019671 1AR-FE ENGINE CONTROL _0106855 CRANKSHAFT POSITION SENSOR A

1AR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 53736 1.REMOVE FRONT FENDER APRON SEAL RH

Hide 11301K 2.REMOVE CRANKSHAFT POSITION SENSOR

a.
A313516

Disconnect the crankshaft position sensor connector.


b.

Remove the bolt and crankshaft position sensor from the timing chain cover sub-assembly.

NOTICE:

If the crankshaft position sensor has been struck or dropped, replace it.