1.DRAIN ENGINE COOLANT
12601B
2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
3.REMOVE AIR CLEANER ASSEMBLY
89422
4.REMOVE ENGINE COOLANT TEMPERATURE SENSOR
Disengage the heater hose from the heater bracket.
Remove the bolt and separate the heater bracket from the cylinder head sub-assembly.
Disconnect the engine coolant temperature sensor connector.
Using a 19 mm union nut wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.
If the engine coolant temperature sensor has been struck or dropped, replace it.
Remove the gasket from the engine coolant temperature sensor.