Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019662 2GR-FE ENGINE CONTROL _0106869 CRANKSHAFT POSITION SENSOR A

2GR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 88310 1.REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

Hide 11401G 2.REMOVE CRANKSHAFT POSITION SENSOR

a.

Disconnect the crankshaft position sensor connector.


b.
A076417

Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.

NOTICE:

If the crankshaft position sensor has been struck or dropped, replace it.