Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › KNOCK SENSOR › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019662 2GR-FE ENGINE CONTROL _0106872 KNOCK SENSOR G

2GR-FE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK CONTROL SENSOR

a.
A294030C02
1.208,0.073 1.521,0.229 0.313,0.156 10 false *a
*a Component without harness connected
(Knock Control Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 25 °C (77 °F) 120 to 280 kΩ


If the result is not as specified, replace the knock control sensor.