Home › Vehicle Exterior › LIGHTING (EXT) › DAYTIME RUNNING LIGHT ASSEMBLY › 2013.12–2016.11
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0106944 DAYTIME RUNNING LIGHT ASSEMBLY G

LIGHTING (EXT)  DAYTIME RUNNING LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81440B 1.INSPECT DAYTIME RUNNING LIGHT ASSEMBLY LH

a.
E287656
0.938,1.427 1.458,1.083 false 2.51,1.406 1.969,1.104 false 0.188,0.156 0.5,0.313 0.313,0.156 10 false *a 0.875,1.438 1.229,1.74 0.354,0.302 10 false B 2.521,1.406 2.896,1.698 0.375,0.292 10 false E
*a Component without harness connected
(Daytime Running Light Assembly LH)


Apply battery voltage to the daytime running light assembly LH and check that the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (E)
Battery negative (-) → Terminal 2 (B)
Daytime running light LH comes on


If the result is not specified, replace the daytime running light assembly LH.


Hide 81430C 2.INSPECT DAYTIME RUNNING LIGHT ASSEMBLY RH

a.
E287656
0.938,1.427 1.458,1.083 false 2.51,1.406 1.969,1.104 false 0.188,0.156 0.5,0.313 0.313,0.156 10 false *a 0.875,1.438 1.229,1.74 0.354,0.302 10 false B 2.521,1.406 2.896,1.698 0.375,0.292 10 false E
*a Component without harness connected
(Daytime Running Light Assembly RH)


Apply battery voltage to the daytime running light assembly RH and check that the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (E)
Battery negative (-) → Terminal 2 (B)
Daytime running light RH comes on


If the result is not specified, replace the daytime running light assembly RH.