Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH › 2013.12–2016.11
RM3160E _59 Vehicle Exterior _019722 LIGHTING (EXT) _0106953 STOP LIGHT SWITCH G

LIGHTING (EXT)  STOP LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.
E145496
0.469,1.917 0.469,1.438 false 0.208,0.167 0.521,0.469 0.313,0.302 10 *a 0.635,2.542 0.885,2.833 0.25,0.292 10 *b 1.281,2.542 1.531,2.833 0.25,0.292 10 *c 0.375,1.25 0.615,1.458 0.24,0.208 10 *d
*a Component without harness connected
(Stop Light Switch Assembly)
*b Not Pushed
*c Pushed
*d Switch Pin


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Switch pin pushed 10 kΩ or higher
Switch pin not pushed Below 1 Ω
3 - 4 Switch pin pushed Below 200 Ω
Switch pin not pushed 10 kΩ or higher


If the result is not as specified, replace the stop light switch assembly.