Home › Vehicle Interior › SEAT › SEAT HEATER SYSTEM
RM3160E _58 Vehicle Interior _019712 SEAT _0107155 SEAT HEATER SYSTEM D

SEAT  SEAT HEATER SYSTEM  OPERATION CHECK  


CHECK FRONT SEAT HEATER


a.

Turn the ignition switch to ON.


b.

Turn the seat heater switch (heater position*1) on and check that the indicator illuminates and the surface of the front seat warms up.


c.

Check that the front seat surface temperature changes according to the operation of the seat heater switch (heater position*1) as follows: Low → High*1 or 1 (Lo) → 2 (Mid) → 3 (Hi)*2.

*1: w/o Climate Control Seat System

*2: w/ Climate Control Seat System




CHECK REAR SEAT HEATER (w/ Rear Seat Heater)


a.

Turn the ignition switch to ON.


b.

Turn the seat heater switch (No. 2 air conditioning control assembly) on and check that the indicator illuminates and the surface of the rear seat warms up.


c.

Check that the rear seat surface temperature changes according to the operation of the seat heater switch (No. 2 air conditioning control assembly) as follows: LO → HI.



CHECK THERMOSTAT IN FRONT SEAT CUSHION HEATER ASSEMBLY LH


a.

Remove the front seat cushion heater assembly LH.

Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER>REMOVAL


b.

Remove the front seatback heater assembly LH.

Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER>REMOVAL


c.
B357857
0.823,0.49 1.177,0.708 0.354,0.219 2.583,0.302 2.938,0.521 0.354,0.219 0.656,1.958 1.031,2.219 0.375,0.26 10 false *b 0.125,0.115 0.438,0.406 0.313,0.292 10 false *a 0.958,0.521 1.271,0.813 0.313,0.292 10 false B 2.719,0.333 3.031,0.625 0.313,0.292 10 false C
*a Component without harness connected
(Front Seat Cushion Heater Assembly LH)
*b Component without harness connected
(Front Seatback Heater Assembly LH)


Connect the C front seat cushion heater assembly LH connector and front seatback heater assembly LH connector.


d.

Apply battery voltage and check the operation of the front seat heater as shown in the table below.

NOTICE:

To prevent the front seat heater from overheating, be sure to disconnect the battery from the front seat heater immediately after this inspection is completed.


OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal B-1 Front seat heater temperature 46 to 54°C (114 to 129°F)
Battery negative (-) → Terminal B-4




CHECK THERMOSTAT IN FRONT SEAT CUSHION HEATER ASSEMBLY RH


a.

Remove the front seat cushion heater assembly RH.

Click hereVehicle Interior>SEAT>FRONT SEAT CUSHION HEATER>REMOVAL


b.

Remove the front seatback heater assembly RH.

Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER>REMOVAL


c.
B357857
0.823,0.49 1.177,0.708 0.354,0.219 2.583,0.302 2.938,0.521 0.354,0.219 0.656,1.958 1.031,2.219 0.375,0.26 10 false *b 0.125,0.115 0.438,0.406 0.313,0.292 10 false *a 0.958,0.521 1.271,0.813 0.313,0.292 10 false D 2.719,0.333 3.031,0.625 0.313,0.292 10 false E
*a Component without harness connected
(Front Seat Cushion Heater Assembly RH)
*b Component without harness connected
(Front Seatback Heater Assembly RH)


Connect the E front seat cushion heater assembly RH connector and front seatback heater assembly RH connector.


d.

Apply battery voltage and check the operation of the front seat heater as shown in the table below.

NOTICE:

To prevent the front seat heater from overheating, be sure to disconnect the battery from the front seat heater immediately after this inspection is completed.


OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal D-1 Front seat heater temperature 46 to 54°C (114 to 129°F)
Battery negative (-) → Terminal D-4




CHECK THERMOSTAT IN SEAT HEATER ASSEMBLY (REAR LH SIDE SEAT CUSHION) (w/ Rear Seat Heater)


a.

Remove the seat heater assembly (rear LH side seat cushion).

Click hereVehicle Interior>SEAT>REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type LH Side)>REMOVAL


b.

Remove the seat heater assembly (rear LH side seatback).

Click hereVehicle Interior>SEAT>REAR SEATBACK HEATER(for 60/40 Split Seat Type LH Side)>REMOVAL


c.
B357857
0.823,0.49 1.177,0.708 0.354,0.219 2.583,0.302 2.938,0.521 0.354,0.219 0.656,1.958 1.031,2.219 0.375,0.26 10 false *b 0.125,0.115 0.438,0.406 0.313,0.292 10 false *a 0.979,0.521 1.292,0.813 0.313,0.292 10 false F 2.719,0.333 3.031,0.625 0.313,0.292 10 false G
*a Component without harness connected
(Seat Heater Assembly (Rear LH Side Seat Cushion)
*b Component without harness connected
(Seat Heater Assembly (Rear LH Side Seatback)


Connect the G seat heater assembly (rear LH side seat cushion) connector and seat heater assembly (rear LH side seatback) connector.


d.

Apply battery voltage and check the operation of the rear seat heater as shown in the table below.

NOTICE:

To prevent the rear seat heater from overheating, be sure to disconnect the battery from the rear seat heater immediately after this inspection is completed.


OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal F-1 Rear seat heater temperature 46 to 54°C (114 to 129°F)
Battery negative (-) → Terminal F-4




CHECK THERMOSTAT IN SEAT HEATER ASSEMBLY (REAR RH SIDE SEAT CUSHION) (w/ Rear Seat Heater)


a.

Remove the seat heater assembly (rear RH side seat cushion).

Click hereVehicle Interior>SEAT>REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type RH Side)>REMOVAL


b.

Remove the seat heater assembly (rear RH side seatback).

Click hereVehicle Interior>SEAT>REAR SEATBACK HEATER(for 60/40 Split Seat Type RH Side)>REMOVAL


c.
B357857
0.823,0.49 1.177,0.708 0.354,0.219 2.583,0.302 2.938,0.521 0.354,0.219 0.656,1.958 1.031,2.219 0.375,0.26 10 false *b 0.125,0.115 0.438,0.406 0.313,0.292 10 false *a 0.969,0.521 1.281,0.813 0.313,0.292 10 false H 2.76,0.333 3.073,0.625 0.313,0.292 10 false I
*a Component without harness connected
(Seat Heater Assembly (Rear RH Side Seat Cushion)
*b Component without harness connected
(Seat Heater Assembly (Rear RH Side Seatback)


Connect the I seat heater assembly (rear RH side seat cushion) connector and seat heater assembly (rear RH side seatback) connector.


d.

Apply battery voltage and check the operation of the rear seat heater as shown in the table below.

NOTICE:

To prevent the rear seat heater from overheating, be sure to disconnect the battery from the rear seat heater immediately after this inspection is completed.


OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal H-1 Rear seat heater temperature 46 to 54°C (114 to 129°F)
Battery negative (-) → Terminal H-4