CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect the F80 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
Measure the values on the wire harness side with the connector disconnected.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| F80-1 (IG+) - Body ground | V - Body ground | Air conditioning amplifier power supply | Engine switch off | Below 1 V |
| Engine switch on (IG) | 11 to 14 V | |||
| F80-14 (GND) - Body ground | BR - Body ground | Air conditioning amplifier ground | Always | Below 1 Ω |
Reconnect the F80 air conditioning amplifier assembly connector.
Check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| F81-10 (SVDB) - Body ground | V - Body ground | Climate control blower control signal | ·
Engine switch on (IG) ·
Seat heater switch (LH side) on (blower position)*1 ·
Seat heater switch (RH side) on (blower position)*2 |
Pulse generation
(See waveform) |
| F81-11 (SVPB) - Body ground | Y - Body ground | Climate control blower control signal | ·
Engine switch on (IG) ·
Seat heater switch (RH side) on (blower position)*1 ·
Seat heater switch (LH side) on (blower position)*2 |
Pulse generation
(See waveform) |
*1: for LHD
*2: for RHD
Waveform (Reference):
| Item | Content |
|---|---|
| Tester Connection | ·
F81-10 (SVDB) - Body ground ·
F81-11 (SVPB) - Body ground |
| Tool Setting | 1 V/DIV., 1 ms/DIV. |
| Vehicle Condition | ·
Engine switch on (IG) ·
Seat heater switch on (blower position) |