Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › ATF TEMPERATURE SENSOR › 2013.12–2016.11
RM3160E _52 Drivetrain _019725 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0107319 ATF TEMPERATURE SENSOR G

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  ATF TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 82125J 1.INSPECT ATF TEMPERATURE SENSOR ASSEMBLY

a.
C133224N07
1.875,1.167 1.573,2.031 false 2.01,1.167 2.375,2.021 false 2.188,2.052 2.583,2.208 0.396,0.156 10 THO1 1.458,2.063 1.698,2.219 0.24,0.156 10 E2

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
E2 - THO1 Always 79 Ω to 156 kΩ
E2 - Body ground and other terminals Always 10 kΩ or higher
THO1 - Body ground and other terminals Always 10 kΩ or higher


If the resistance is out of the specified range with the ATF temperature shown in the preceding table, replace the ATF temperature sensor assembly. Otherwise, the driveability of the vehicle may decrease.

ATF Temperature Specified Condition
10°C (50°F) 5 to 8 kΩ
25°C (77°F) 2.5 to 4.5 kΩ
110°C (230°F) 0.22 to 0.28 kΩ