Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › ATF TEMPERATURE SENSOR › 2013.12–2016.11
RM3160E _52 Drivetrain _019726 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0107336 ATF TEMPERATURE SENSOR A

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  ATF TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 82125J 1.INSTALL ATF TEMPERATURE SENSOR ASSEMBLY

a.

Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.


b.

Coat the 4 bolts with ATF.


c.
C139240C04
2.292,0.979 2.292,1.208 2.292,1.208 2.375,1.208 false 2.396,1.115 2.552,1.292 0.156,0.177 10 true *a 1.635,1.219 1.75,1.406 0.115,0.188 10 true A 1.729,0.365 1.875,0.51 0.146,0.146 10 true B 2.313,0.406 2.458,0.552 0.146,0.146 10 true B 2.802,0.448 2.948,0.594 0.146,0.146 10 true B
*a Clamp


Install the ATF temperature sensor assembly and clamp to the transmission valve body assembly with the 4 bolts.

Torque:
10.8 N*m (110 kgf*cm, 8 ft.*lbf)

Bolt Length:
Bolt (A):

25 mm (0.984 in.)

Bolt (B):

85 mm (3.35 in.)



d.

Connect the ATF temperature sensor assembly connector.


Hide 35330 2.INSTALL VALVE BODY OIL STRAINER ASSEMBLY