Home › Drivetrain › U660F AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE › 2013.12–2014.08
RM3160E _52 Drivetrain _019726 U660F AUTOMATIC TRANSMISSION / TRANSAXLE _0107351 DIFFERENTIAL CASE A

U660F AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41221 1.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
C196807
1.271,1.417 1.271,1.156 1.271,1.156 0.521,1.156 false 1.177,1.479 1.177,1.156 false 0.313,1.063 0.563,1.26 0.25,0.198 10 false *a
*a Matchmark


Put matchmarks on the front differential ring gear and differential case.


b.
C301117

Remove the 12 bolts from the front differential ring gear.


c.
C196808

Using a plastic hammer, remove the front differential ring gear from the differential case.


Hide 41311E 2.REMOVE FR0NT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

a.
C298582
1.396,1.052 0.698,0.896 0.698,0.896 1.031,0.781 false 1.385,1.219 0.719,0.896 false 2.042,0.031 2.354,0.188 0.313,0.156 10 false *a 0.021,0.292 0.333,0.448 0.313,0.156 10 false *b 0.417,0.833 0.875,1.031 0.458,0.198 10 false SST
*a Turn
*b Hold


Using SST, remove the front differential case front tapered roller bearing from the differential case.

SST
09950-00020  
09950-00030  
09950-60010  (09951-00480)


b.
C196812N02
0.762,0.395 1.091,0.568 0.329,0.173 10 SST 1.135,0.481 1.407,0.481 false 1.577,1.015 1.884,1.179 0.307,0.164 10 SST 1.942,1.098 2.413,1.098 false

Using SST, remove the front differential case front tapered roller bearing outer race and shim from the transaxle housing.

SST
09308-00010  


Hide 41311F 3.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

a.
C298556
1.49,1.135 1.698,1.104 false 1.219,1.365 1.708,1.104 false 1.438,1.458 1.708,1.104 false 1.885,0.292 2.198,0.448 0.313,0.156 10 false *a 0.042,0.552 0.354,0.708 0.313,0.156 10 false *b 1.792,1.01 2.24,1.208 0.448,0.198 10 false SST
*a Turn
*b Hold


Using SST, remove the front differential case rear tapered roller bearing from the differential case.

SST
09950-00020  
09950-00030  
09950-60010  (09951-00480)


b.
C196814
0.594,0.448 0.76,0.448 false 2.833,1.229 2.833,1.448 false 0.25,0.365 0.573,0.552 0.323,0.188 10 false SST 2.719,1.49 3.094,1.74 0.375,0.25 10 false SST

Using SST, remove the front differential case rear tapered roller bearing outer race from the transaxle case sub-assembly.

SST
09308-00010  


Hide 41342A 4.REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.
C138710

Using a 3 mm pin punch and a hammer, remove the front differential pinion shaft straight pin from the differential case.

HINT:

Before removing the front differential pinion shaft straight pin, release the staked part of the differential case with a pin punch.



Hide 41342F 5.REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

a.
C196815

Remove the front No. 1 differential pinion shaft from the differential case.


Hide 41331Q 6.REMOVE DIFFERENTIAL SIDE GEAR

a.
C301118C01
0.875,0.167 1,0.167 1,0.167 1.167,0.354 false 0.469,1.542 0.729,1.542 false 0.583,1.125 0.708,1.125 0.708,1.125 0.875,1.313 false 1.448,1.646 1.708,1.646 false 1.448,1.938 1.708,1.938 false 1.365,0.698 1.677,0.188 1.677,0.188 1.802,0.188 false 1.771,0.802 1.906,0.563 1.906,0.563 2.031,0.563 false 1.656,1.052 1.823,1.323 1.823,1.323 1.938,1.323 false 2,1.24 2.365,1.49 0.365,0.25 10 false *1 0.302,1.448 0.667,1.708 0.365,0.26 10 false *2 1.844,0.094 2.188,0.375 0.344,0.281 10 false *3 0.708,0.073 1.021,0.323 0.313,0.25 10 false *4 1.75,1.865 2.125,2.177 0.375,0.313 10 false *4 0.406,1.042 0.76,1.25 0.354,0.208 10 false *1 1.76,1.573 2.104,1.854 0.344,0.281 10 false *3 2.063,0.49 2.427,0.75 0.365,0.26 10 false *2
*1 Front Differential Pinion
*2 Front Differential Pinion Thrust Washer
*3 Differential Side Gear
*4 Front No. 1 Differential Side Gear Thrust Washer


Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 differential side gears and 2 front No. 1 differential side gear thrust washers from the differential case.


Hide 43410M 7.REMOVE FRONT DRIVE SHAFT OIL SEAL RH

a.

Outside:

i.
C196824
2.167,1.083 2.406,1.083 false 1.198,1.115 1.333,1.115 1.333,1.115 1.385,1 false 0.875,1.031 1.333,1.229 0.458,0.198 10 false SST 2.448,0.99 2.906,1.188 0.458,0.198 10 false SST

Using SST, remove the front drive shaft oil seal RH from the transaxle housing.

SST
09308-00010  



b.

Inside:

i.
C301119
0.563,1.323 0.948,1.323 false 2.438,0.427 2.531,0.427 2.531,0.427 2.635,0.604 false 0.271,1.25 0.771,1.521 0.5,0.271 10 false SST 2.135,0.365 2.635,0.635 0.5,0.271 10 false SST

Using SST, remove the front drive shaft oil seal RH from the differential case.

SST
09308-00010  



Hide 43420H 8.REMOVE FRONT DRIVE SHAFT OIL SEAL LH

a.
C196822N02
0.719,0.479 0.865,0.479 false 1.906,0.875 2.063,0.875 false 0.354,0.396 0.677,0.563 0.323,0.167 10 false SST 1.573,0.792 1.896,0.958 0.323,0.167 10 false SST

Using SST, remove the front drive shaft oil seal LH from the transaxle case sub-assembly.

SST
09308-00010